705-5100-111 Datasheet, PDF (16/28 Pages) Magnetrol International, Inc. – Eclipse® Enhanced Model 705 Guided Wave Radar Level Transmitter

MODEL NUMBER
COAXIAL PROBE
Models available for quick shipment, usually within one week after factory
receipt of a complete purchase order, through the Expedite Ship Plan (ESP).
BASIC MODEL NUMBER – GWR probe suited for external cage and/or in-tank mounting
7*R
7*M
7*T
7*N
GWR probe for overall level
GWR probe for level w/ flushing connection
GWR probe for interface level
GWR probe for interface level w/ flushing connection
ε_r ≥ 1.4 - WHG approved
ε_r ≥ 1.4 - WHG approved
upper liq: ε_r ≥ 1.4 and ≤ 5 / lower liq: ≥ 15 - WHG aprvd.
upper liq: ε_r ≥ 1.4 and ≤ 5 / lower liq: ≥ 15 - WHG aprvd.
*Specify “E” for English (e.g., 7ER) or “M” for Metric (e.g., 7MR)
MATERIAL OF CONSTRUCTION – wetted parts (including process connection flange when applicable)
A 316/316L (1.4401/1.4404) SS w/ Teflon^® spacers
B Hastelloy C (2.4819)
C Monel (2.4360)
J 316/316L SS NACE Construction
PROCESS CONNECTION – SIZE/TYPE (consult factory for other process connections)
Refer to Bulletin 57-102 for Enlarged Coaxial Probe
Threaded
1 1 ³â„4" NPT Thread
2 2 1" BSP (G1) thread
ANSI Flanges
2 3 1" 150# ANSI RF
2 4 1" 300# ANSI RF
2 5 1" 600# ANSI RF
3 3 1¹â„2" 150# ANSI RF
3 4 1¹â„2" 300# ANSI RF
3 5 1¹â„2" 600# ANSI RF
4 3 2" 150# ANSI RF
4 4 2" 300# ANSI RF
4 5 2" 600 lbs. ANSI RF
5 3 3" 150 lbs. ANSI RF
5 4 3" 300 lbs. ANSI RF
5 5 3" 600 lbs. ANSI RF
6 3 4" 150 lbs. ANSI RF
6 4 4" 300 lbs. ANSI RF
6 5 4" 600 lbs. ANSI RF
EN/DIN Flanges
B B DN 25, PN 16/25/40 EN 1092-1 Type A
B C DN 25, PN 63/100 EN 1092-1 Type B2
C B DN 40, PN 16/25/40 EN 1092-1 Type A
C C DN 40, PN 63/100 EN 1092-1 Type B2
D A DN 50, PN 16
EN 1092-1 Type A
D B DN 50, PN 25/40 EN 1092-1 Type A
D D DN 50, PN 63
EN 1092-1 Type B2
D E DN 50, PN 100
EN 1092-1 Type B2
E A DN 80, PN 16 EN 1092-1 Type A
E B DN 80, PN 25/40 EN 1092-1 Type A
E D DN 80, PN 63 EN 1092-1 Type B2
E E DN 80, PN 100 EN 1092-1 Type B2
F A DN 100, PN 16 EN 1092-1 Type A
F B DN 100, PN 25/40 EN 1092-1 Type A
F D DN 100, PN 63 EN 1092-1 Type B2
F E DN 100, PN 100 EN 1092-1 Type B2
Torque Tube Mating Flanges Œ
T T 600# Fisher (249B/259B) in carbon steel – as per dimensions of Figure 1 on page 11
T U 600# Fisher (249C) in stainless steel –
as per dimensions of Figure 2 on page 11
U T 600# Masoneilan flange in carbon steel – as per dimensions of Figure 3 on page 11
U U 600# Masoneilan flange in stainless steel – as per dimensions of Figure 3 on page 11
7
16
PROCESS SEAL – O-RING MATERIAL 
0 Viton GFLT seal – for universal use
-40° F (-40° C) / +400° F (+200° C)
2 Kalrez 4079 seal – for aggressive media Ž
-40° F (-40° C) / +400° F (+200° C)
8 Aegis PF 128 seal – for steam  and NACE apps -4° F (-20° C) / +400° F (+200° C)
INSERTION LENGTH 
24 to 240 inches (60 to 610 cm)
(unit of measure is determined by second digit of Model Number)
Examples: 24 inches = 024; 60 centimeters = 060
ΠAlways check dimensions if ANSI/DIN flanges are not used.
 Consult factory for alternative o-ring materials.
Ž For ammonia/chlorine applications use the 7xD GWR probe.
Consult factory for HF acid applications.
 Max +400° F (+200° C) for use on steam.
 Consult factory for insertion lengths < 24" (60 cm)