Z16C32SL Datasheet, PDF (6/22 Pages) Zilog, Inc. – IUSC™ INTEGRATED UNIVERSAL SERIAL CONTROLLER

Z16C32 SL1660 ONLY
IUSC^™ Integrated Universal Serial Controller
ABSOLUTE MAXIMUM RATINGS
SYM Description Min
Max
Unit
V_CC Supply Voltage -0.3
+70
V
T_STG Storage Temp 65° +150°
C
T_A
Operating
0
+70
C
Ambient Temp
Zilog
Stresses greater than those listed under Absolute
Maximum Ratings may cause permanent damage to the
device. This is a stress rating only; operation of the device
at any condition above those indicated in the operational
sections of these specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods
may affect device reliability.
STANDARD TEST CONDITIONS
The DC Characteristics and Capacitance section below
apply for the following standard test conditions, unless
otherwise noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (Standard
Test Load). Standard conditions are as follows:
s +4.5 V < V_CC < +5.5 V
s GND = 0 V
s T_A as specified in Ordering Information
From Output
Under Test
50 pF
+5V
1.73 kΩ
250 µA
CAPACITANCE
Symbol
Parameter
Min
C_IN
C_OUT
C_I/O
Input Capacitance
Output Capacitance
Bidirectional Capacitance
Note: f = 1 MHz, over specified temperature range.
MISCELLANEOUS
Transistor Count - 100,000
TEMPERATURE RANGE
Standard: 0°C to +70°C
Figure 5. Standard Test Load
Max
Unit Condition
10
pF
Unmeasured pins
15
pF
returned to ground.
20
pF
1-6
PRELIMINARY
CP97HHS0100