English
Language : 

XC17V00_08 Datasheet, PDF (10/15 Pages) Xilinx, Inc – XC17V00 Series Configuration PROMs
◁
R
XC17V00 Series Configuration PROMs
Absolute Maximum Ratings(1)
Symbol
Description
Conditions
Units
VCC
VPP
VIN
VTS
TSTG
TJ
Supply voltage relative to GND
Supply voltage relative to GND
Input voltage relative to GND
Voltage applied to High-Z output
Storage temperature (ambient)
Junction temperature
–0.5 to +7.0
V
–0.5 to +12.5
V
–0.5 to VCC +0.5
V
–0.5 to VCC +0.5
V
–65 to +150
°C
+125
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied.
Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.
Operating Conditions (3V Supply)
Symbol
Description
Min
Max
Units
VCC(1)
TVCC(2)
Supply voltage relative to GND (TA = 0°C to +70°C)
Supply voltage relative to GND (TA = –40°C to +85°C)
VCC rise time from 0V to nominal voltage
Commercial
3.0
3.6
V
Industrial
3.0
3.6
V
1.0
50
ms
Notes:
1. During normal read operation VPP must be connected to VCC.
2. At power up, the device requires the VCC power supply to monotonically rise from 0V to nominal voltage within the specified VCC rise time. If
the power supply cannot meet this requirement, then the device may not power-on-reset properly.
DC Characteristics Over Operating Condition
Symbol
Description
Min
Max
Units
VIH
VIL
VOH
VOL
ICCA
High-level input voltage
Low-level input voltage
High-level output voltage (IOH = –3 mA)
Low-level output voltage (IOL = +3 mA)
Supply current, active mode (at maximum frequency)
(XC17V16 and XC17V08(1) only)
2
VCC
V
0
0.8
V
2.4
–
V
–
0.4
V
–
100
mA
ICCA
Supply current, active mode (at maximum frequency)
(XC17V04, XC17V02(1), and XC17V01(1) only)
–
15
mA
ICCS
IL
CIN
COUT
Supply current, standby mode
Input or output leakage current
Input capacitance (VIN = GND, f = 1.0 MHz)
Output capacitance (VIN = GND, f = 1.0 MHz)
–
1
mA
–10
10
μA
–
15
pF
–
15
pF
Notes:
1. Specific part number and package combinations have been discontinued. Refer to XCN07010.
DS073 (v1.12) November 13, 2008
www.xilinx.com
Product Specification
10
 ▷