X68C64 Datasheet, PDF (7/12 Pages) Xicor Inc. – E2 Micro-Peripheral

X68C64
ABSOLUTE MAXIMUM RATINGS*
Temperature under Bias .................. –65°C to +135°C
Storage Temperature ....................... –65°C to +150°C
Voltage on any Pin with
Respect to V_SS .................................. –1V to +7V
D.C. Output Current ............................................. 5mA
Lead Temperature
(Soldering, 10 seconds) .............................. 300°C
*COMMENT
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and the functional operation of
the device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reli-
ability.
RECOMMENDED OPERATING CONDITIONS
Temperature
Min.
Max.
Supply Voltage
Limits
Commercial
0°C
+70°C
X68C64
5V ±10%
Industrial
–40°C
+85°C
3868 PGM T04.1
Military
–55°C
+125°C
3868 PGM T03.1
D.C. OPERATING CHARACTERISTICS (Over recommended operating conditions unless otherwise specified.)
Symbol
Parameter
Limits
Min.
Max.
Units
Test Conditions
I_CC
V_CC Current (Active)
ISB1(CMOS) VCC Current (Standby)
ISB2(TTL) VCC Current (Standby)
I_LI
ILO
VlL(1)
V_IH(1)
VOL
VOH
Input Leakage Current
Output Leakage Current
Input LOW Voltage
–1
Input HIGH Voltage
2
Output LOW Voltage
Output HIGH Voltage
2.4
CAPACITANCE T_A = +25°C, f = 1MHz, V_CC = 5V
Symbol
Test
60
mA
500
µA
6
mA
10
µA
10
µA
0.8
V
V_CC + 0.5 V
0.4
V
V
Max.
CE = V_IL, All I/O’s = Open,
Other Inputs = V_CC, AS = V_IH
CE = VSS, All I/O’s = Open,Other
Inputs = VCC – 0.3V, AS = VSS
CE = VIH, All I/O’s = Open, Other
Inputs = VIH, AS = VIL
V_IN = V_SS to V_CC
VOUT = VSS to VCC, E = VIL
IOL = 2.1mA
IOH = –400µA
3868 PGM T05.1
Units
Conditions
CI/O(2)
CIN(2)
POWER-UP TIMING
Input/Output Capacitance
Input Capacitance
10
pF
6
pF
VI/O = 0V
VIN = 0V
3868 PGM T06
Symbol
Parameter
Max.
Units
tPUR(2)
Power-Up to Read
1
tPUW(2)
Power-Up to Write
5
Notes: (1) V_IL min. and V_IH max. are for reference only and are not tested.
(2) This parameter is periodically sampled and not 100% tested.
ms
ms
3868 PGM T07
7