WM8351 Datasheet, PDF (145/330 Pages) Wolfson Microelectronics plc – Wolfson AudioPlus™ Stereo CODEC with Power Management

Production Data
WM8351
The /VCC_FAULT output is configurable by the control fields in Register R215. The LS_FAULT bit
described in Table 95 selects whether the Limit Switch contributes to the /VCC_FAULT indication.
When LS_FAULT = 0, then an overcurrent condition on the Limit Switch will cause the /VCC_FAULT
output to be set to logic low.
ADDRESS
R215 (D7h)
VCC_FAULT
BIT
LABEL
15 LS_FAULT
Table 95 Limit Switch /VCCFAULT Mask
DEFAULT
0
DESCRIPTION
Limit Switch fault mask for the
/VCC_FAULT
0 = don't mask converter fault
1 = mask converter fault
w
PD, April 2012, Rev 4.5
145