English
Language : 

W25Q16DW Datasheet, PDF (69/83 Pages) Winbond – 1.8V 16M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q16DW
11. ELECTRICAL CHARACTERISTICS
11.1 Absolute Maximum Ratings (1)
PARAMETERS
Supply Voltage
SYMBOL
VCC
Voltage Applied to Any Pin
VIO
Transient Voltage on any Pin
VIOT
Storage Temperature
Lead Temperature
Electrostatic Discharge Voltage
TSTG
TLEAD
VESD
CONDITIONS
Relative to Ground
<20nS Transient
Relative to Ground
Human Body Model(3)
RANGE
–0.6 to VCC+0.4
–0.6 to VCC+0.4
–1.0V to VCC+1.0V
–65 to +150
See Note (2)
–2000 to +2000
UNIT
V
V
V
°C
°C
V
Notes:
1. This device has been designed and tested for the specified operation ranges. Proper operation outside
of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device reliability.
Exposure beyond absolute maximum ratings may cause permanent damage.
2. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and the
European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
3. JEDEC Std JESD22-A114A (C1=100pF, R1=1500 ohms, R2=500 ohms).
11.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
Supply Voltage(1)
Ambient Temperature,
Operating
VCC
TA
FR = 104MHz,
Industrial
fR = 50MHz
SPEC
MIN MAX
1.65 1.95
–40 +85
UNIT
V
°C
Note:
1. VCC voltage during Read can operate across the min and max range but should not exceed ±10% of
the programming (erase/write) voltage.
- 69 -
Publication Release Date: April 01, 2011
Preliminary - Revision A