W25Q80 Datasheet, PDF (60/61 Pages) Winbond – 8M-BIT, 16M-BIT AND 32M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

W25Q80, W25Q16, W25Q32
14. REVISION HISTORY
VERSION
A
A1
A2
A3
A4
A5
B
DATE
10/20/06
11/9/06
11/15/06
2/22/07
4/20/07
6/20/07
9/26/07
PAGE
Various
49
20, 45, 49 & 57
19, 28, 30 & 45
13, 15-17 & 23
5, 11, 13, 15-17,
19, 35, 36, 43,
45-47, 50 & 59
DESCRIPTION
New Create Advanced
Figures 2, 3A-B, 13A–14C, 16, 24, 25
Table 10.2.2: Write Status Reg 1 and 2
Erase Suspend 10.2.21
tCHSH, tSHCH = 5nS
tSHSL = 10ns for Read & 50ns for Write, Erase and
Program instructions
Removed Burst Read Quad I/O Instruction.
Updated ordering Information.
Added transient voltage specification.
Added Mode Bit Reset instruction and description.
Added note for SRP1,0 status during Power Lock-
Down protection.
Updated Status Register memory protection tables.
Updated Instruction Diagrams.
Updated Status Register memory protection tables.
Added note for Power Lock-Down, OTP functions.
Added note for 64 Bit unique ID.
Added note for 32KB/64KB block erase command.
Updated Mode Bit Reset command description.
Updated data retention temperature.
Updated tSHSL description, added tCLQV2.
Updated tBP1.
Preliminary Designation
The “Preliminary” designation on a Winbond SpiFlash memory datasheet indicates that the product is
not fully characterized. The specifications are subject to change and are not guaranteed. Winbond or an
authorized sales representative should be consulted for current information before using this product.
Trademarks
Winbond and SpiFlash are trademarks of Winbond Electronics Corporation.
All other marks are the property of their respective owner.
- 60 -