W83782D Datasheet, PDF (53/73 Pages) Winbond – MONITORING IC

Priliminary W83782D
7 6 5 4 32 1 0
Bit 7: Temperature <0> of sensor2, which is low byte.
Bit 6-0: Reserved. This bit should be set to 0.
Reserved
TEMP2<0>
7.33 Temperature Sensor 2 Configuration Register - index 52h (Bank 1)
Register Location:
Power on Default Value
Size:
52h
<7:0> = 0x00
8 bits
7 65432 1 0
STOP2
INTMOD
Reserved
FAULT
FAULT
Reserved
Reserved
Reserved
Bit 7-5: Read - Reserved. This bit should be set to 0.
Bit 4-3: Read/Write - Number of faults to detect before setting OVT# output to avoid false tripping
due to noise.
Bit 2: Read - Reserved. This bit should be set to 0.
Bit 1: Read/Write - OVT# Interrupt mode select. This bit default is set to 0, which is compared mode.
When set to 1, interrupt mode will be selected.
Bit 0: Read/Write - When set to 1 the sensor will stop monitor.
-45 -
Publication Release Date: April 1999
Revision A1