W9725G6KB25I-TR Datasheet, PDF (5/87 Pages) Winbond – 4M X 4 BANKS X 16 BIT DDR2 SDRAM

W9725G6KB
3. ORDER INFORMATION
PART NUMBER
W9725G6KB-18
W9725G6KB-25
W9725G6KB25I
W9725G6KB25A
W9725G6KB25K
W9725G6KB-3
SPEED GRADE
DDR2-1066 (7-7-7)
DDR2-800 (5-5-5) or DDR2-800 (6-6-6)
DDR2-800 (5-5-5) or DDR2-800 (6-6-6)
DDR2-800 (5-5-5) or DDR2-800 (6-6-6)
DDR2-800 (5-5-5) or DDR2-800 (6-6-6)
DDR2-667 (5-5-5)
OPERATING TEMPERATURE
0°C ≤ TCASE ≤ 85°C
0°C ≤ TCASE ≤ 85°C
-40°C ≤ TCASE ≤ 95°C
-40°C ≤ TA, TCASE ≤ 95°C
-40°C ≤ TA, TCASE ≤ 105°C
0°C ≤ TCASE ≤ 85°C
4. KEY PARAMETERS
SYM.
SPEED GRADE
Bin(CL-tRCD-tRP)
Part Number Extension
@CL = 7
@CL = 6
tCK(avg) Average clock period
@CL = 5
@CL = 4
tRCD
tREFI
tRP
tRC
tRAS
IDD0
IDD1
IDD4R
IDD4W
IDD5B
IDD6
IDD7
@CL = 3
Active to Read/Write Command Delay Time
-40°C ≤ TCASE ≤ 85°C
Average periodic
refresh Interval
0°C ≤ TCASE ≤ 85°C
85°C < TCASE ≤ 95°C
95°C < TCASE ≤ 105°C
Precharge to Active Command Period
Active to Ref/Active Command Period
Active to Precharge Command Period
Operating one bank active-precharge current
Operating one bank active-read-precharge current
Operating burst read current
Operating burst write current
Burst refresh current
Self refresh current (TCASE ≤ 85C)
Operating bank interleave read current
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Min.
Min.
Max.
Max.
Max.
Max.
Max.
Max.
Max.
DDR2-1066
7-7-7
-18
1.875 nS
7.5 nS
2.5 nS
7.5 nS
3 nS
7.5 nS
3.75 nS
7.5 nS


13.125 nS
*²
7.8 μS*¹
3.9 μS*⁴
*⁶
13.125 nS
58.125 nS
45 nS
70 mA
80 mA
125 mA
130 mA
75 mA
6 mA
160 mA
DDR2-800
5-5-5/6-6-6
-25/25I/25A/25K


2.5 nS
8 nS
2.5 nS
8 nS
3.75 nS
8 nS
5 nS
8 nS
12.5 nS
7.8 μS*^{2, 3}
7.8 μS*¹
3.9 μS*⁴
3.9 μS*⁵
12.5 nS
57.5 nS
45nS
60 mA
70 mA
105 mA
110 mA
70 mA
6 mA
135 mA
DDR2-667
5-5-5
-3




3 nS
8 nS
3.75 nS
8 nS
5 nS
8 nS
15 nS
*²
7.8 μS*¹
3.9 μS*⁴
*⁶
15 nS
60 nS
45 nS
55 mA
65 mA
95 mA
100 mA
65 mA
6 mA
115 mA
Notes:
1. All speed grades support 0°C ≤ TCASE ≤ 85°C with full JEDEC AC and DC specifications.
2. For -18, -25 and -3 speed grades, -40°C ≤ TCASE < 0°C is not available.
3. 25I, 25A and 25K speed grades support -40°C ≤ TCASE ≤ 85°C with full JEDEC AC and DC specifications.
4. For all speed grade parts, TCASE is able to extend to 95°C with doubling Auto Refresh commands in frequency to a 32 mS
period ( tREFI = 3.9 µS) and to enter to Self Refresh mode at this high temperature range via A7 “1” on EMR (2).
5. For 25K automotive speed grade, TCASE is able to extend to 105°C with doubling Auto Refresh commands in frequency to
a 32 mS period ( tREFI = 3.9 µS) and to enter to Self Refresh mode at this high temperature range via A7 “1” on EMR (2).
6. For -18, -25, 25I, 25A and -3 speed grades, 95°C < TCASE ≤ 105°C is not available.
Publication Release Date: Sep. 03, 2012
-5-
Revision A03