W25Q64BV Datasheet, PDF (24/61 Pages) Winbond – 64M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

W25Q64BV
11.2.9 Fast Read (0Bh)
The Fast Read instruction is similar to the Read Data instruction except that it can operate at the highest
possible frequency of FR (see AC Electrical Characteristics). This is accomplished by adding eight
“dummy” clocks after the 24-bit address as shown in figure 9. The dummy clocks allow the devices
internal circuits additional time for setting up the initial address. During the dummy clocks the data value
on the DO pin is a “don’t care”.
Figure 9. Fast Read Instruction Sequence Diagram
- 24 -