W3E32M64S-XSBX Datasheet, PDF (10/17 Pages) White Electronic Designs Corporation – 32Mx64 DDR SDRAM

White Electronic Designs
W3E32M64S-XSBX
ABSOLUTE MAXIMUM RATINGS
Parameter
Voltage on VCC, VCCQ Supply relative to Vss
Voltage on I/O pins relative to Vss
Operating Temperature TA (Mil)
Operating Temperature TA (Ind)
Storage Temperature, Plastic
Unit
-1 to 3.6
V
-1 to 3.6
V
-55 to +125
°C
-40 to +85
°C
-55 to +125
°C
NOTE: Stress greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions greater than those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
CAPACITANCE (NOTE 13)
Parameter
Input Capacitance: CK/CK#
Addresses, BA0-1 Input Capacitance
Input Capacitance: All other input-only pins
Input/Output Capacitance: I/Os
Symbol
Max
Unit
CI1
6
pF
CA
20
pF
CI2
6
pF
CIO
9
pF
BGA THERMAL RESISTANCE
Description
Junction to Ambient (No Airflow)
Junction to Ball
Junction to Case (Top)
Symbol
Theta JA
Theta JB
Theta JC
Typical
15.7
13.8
2.8
Refer to "PBGA Thermal Resistance Correlation" (Application Note) at www.wedc.com in the application notes section for modeling conditions.
Units
°C/W
°C/W
°C/W
Notes
1
1
1
DC ELECTRICAL CHARACTERISTICS AND OPERATING CONDITIONS (NOTES 1-5, 16, 52)
VCC, VCCQ = +2.5V ± 0.2V; -55°C ≤ TA ≤ +125°C
Parameter/Condition
Supply Voltage (36, 41)
I/O Supply Voltage (36, 41, 44, 52)
Input Leakage Current: Any input 0V ≤ VIN ≤ VCC (All other pins not under test = 0V)
Input Leakage Address Current (All other pins not under test = 0V)
Output Leakage Current: I/Os are disabled; 0V ≤ VOUT ≤ VCCQ
Output Levels: Full drive option (37, 39)
High Current (VOUT = VCCQ - 0.373V, minimum VREF, minimum VTT)
Low Current (VOUT = 0.373V, maximum VREF, maximum VTT)
Output Levels: Reduced drive option (38, 39)
High Current (VOUT = VCCQ - 0.763V, minimum VREF, minimum VTT)
Low Current (VOUT = 0.763V, maximum VREF, maximum VTT)
I/O Reference Voltage (6,44)
I/O Termination Voltage (7, 44)
Symbol
VCC
VCCQ
II
II
IOZ
IOH
IOL
IOHR
IOLR
VREF
VTT
Min
2.3
2.3
-2
-8
-5
-12
12
-9
9
0.49 x VCCQ
VREF - 0.04
Max
2.7
2.7
2
8
5
-
-
-
-
0.51 x VCCQ
VREF + 0.04
Units
V
V
µA
µA
µA
mA
mA
mA
mA
V
V
July 2006
Rev. 5
10
White Electronic Designs Corporation • [phone] • www.wedc.com