VS-ST303C Datasheet, PDF (3/10 Pages) Vishay Siliconix – Center amplifying gate

www.vishay.com
VS-ST303C Series
Vishay Semiconductors
SWITCHING
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum non-repetitive rate of rise
of turned on current
Typical delay time
dI/dt
t_d
T_J = T_J maximum, V_DRM = Rated V_DRM
I_TM = 2 x dI/dt
T_J = 25 °C, V_DM = Rated V_DRM, I_TM = 50 A DC, t_p = 1 μs
Resistive load, gate pulse: 10 V, 5 Ω source
minimum
Maximum turn-off time ⁽¹⁾
t_q
maximum
T_J = T_J maximum,
I_TM = 550 A, commutating dI/dt = 40 A/μs
V_R = 50 V, t_p = 500 μs, dV/dt: See table in device code
Note
(1) _{tq = 10 μs to 20 μs for 400 V to 800 V devices; tq = 15 μs to 30 μs for 1000 V to 1200 V devices}
VALUES UNITS
1000
A/µs
0.83
10
µs
30
BLOCKING
PARAMETER
SYMBOL
Maximum critical rate of rise of off-state voltage
dV/dt
Maximum peak reverse and off-state leakage current
I_RRM,
I_DRM
TEST CONDITIONS
T_J = T_J maximum, linear to 80 % V_DRM,
higher value available on request
T_J = T_J maximum, rated V_DRM/V_RRM applied
VALUES
500
UNITS
V/µs
50
mA
TRIGGERING
PARAMETER
Maximum peak gate power
Maximum average gate power
Maximum peak positive gate current
Maximum peak positive gate voltage
Maximum peak negative gate voltage
Maximum DC gate currrent required to trigger
Maximum DC gate voltage required to trigger
Maximum DC gate current not to trigger
Maximum DC gate voltage not to trigger
SYMBOL
P_GM
P_G(AV)
I_GM
+ V_GM
- V_GM
I_GT
V_GT
I_GD
V_GD
TEST CONDITIONS
T_J = T_J maximum, f = 50 Hz, d% = 50
T_J = T_J maximum, t_p ≤ 5 ms
T_J = 25 °C, V_A = 12 V, R_a = 6 Ω
T_J = T_J maximum, rated V_DRM applied
VALUES
60
10
10
20
5
200
3
20
0.25
UNITS
W
A
V
mA
V
mA
V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum operating junction temperature range
Maximum storage temperature range
Maximum thermal resistance, junction to heatsink
T_J
T_Stg
R_thJ-hs
DC operation single side cooled
DC operation double side cooled
Maximum thermal resistance, case to heatsink
R_thC-hs
DC operation single side cooled
DC operation double side cooled
Mounting force, ± 10 %
Approximate weight
Case style
See dimensions - link at the end of datasheet
VALUES UNITS
-40 to 125
°C
-40 to 150
0.09
0.04
K/W
0.020
0.010
9800
N
(1000)
(kg)
83
g
TO-200AB (E-PUK)
Revision: 20-Dec-13
3
Document Number: 94373
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000