English
Language : 

SI7703EDN_08 Datasheet, PDF (1/13 Pages) Vishay Siliconix – Single P-Channel 20-V (D-S) MOSFET With Schottky Diode
Si7703EDN
Vishay Siliconix
Single P-Channel 20-V (D-S) MOSFET With Schottky Diode
PRODUCT SUMMARY
VDS (V)
RDS(on) (Ω)
0.048 at VGS = - 4.5 V
- 20
0.068 at VGS = - 2.5 V
0.090 at VGS = - 1.8 V
ID (A)
- 6.3
- 5.3
- 4.6
SCHOTTKY PRODUCT SUMMARY
VKA (V)
Vf (V)
Diode Forward Voltage
IF (A)
20
0.48 V at 0.5 A
1.0
FEATURES
• Halogen-free According to IEC 61249-2-21
Available
• TrenchFET® Power MOSFETS: 1.8 V Rated
• ESD Protected: 4500 V
• Ultra-Low Thermal Resistance, PowerPAK®
Package with Low 1.07 mm Profile
APPLICATIONS
• Charger Switching
PowerPAK 1212-8
3.30 mm
A
1
A
3.30 mm
2
S
3
G
4
K
8
K
7
D
G
6
D
5
Bottom View
Ordering Information: Si7703EDN-T1-E3 (Lead (Pb)-free)
Si7703EDN-T1-GE3 (Lead (Pb)-free and Halogen-free)
S
K
3 kΩ
D
A
P-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
Parameter
Symbol
10 s
Steady State
Unit
Drain-Source Voltage (MOSFET and Schottky)
VDS
- 20
Reverse Voltage (Schottky)
VKA
20
V
Gate-Source Voltage (MOSFET)
VGS
± 12
± 12
Continuous Drain Current (TJ = 150 °C) (MOSFET)a
TA = 25 °C
TA = 85 °C
ID
- 6.3
- 4.5
- 4.3
- 3.1
Pulsed Drain Current (MOSFET)
Continuous Source Current (MOSFET Diode Conduction)a
IDM
- 20
A
IS
- 2.3
- 1.1
Average Foward Current (Schottky)
IF
1.0
Pulsed Foward Current (Schottky)
IFM
7
Maximum Power Dissipation (MOSFET)a
Maximum Power Dissipation (Schottky)a
TA = 25 °C
TA = 85 °C
TA = 25 °C
PD
TA = 85 °C
2.8
1.5
2.0
1.0
1.3
0.7
1.1
0.6
W
Operating Junction and Storage Temperature Range
Soldering Recommendationsb,c
TJ, Tstg
- 55 to 150
°C
260
Notes:
a. Surface Mounted on 1" x 1" FR4 board.
b. See Solder Profile (www.vishay.com/ppg?73257). The PowerPAK 1212-8 is a leadless package. The end of the lead terminal is exposed copper
(not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not
required to ensure adequate bottom side solder interconnection.
c. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components.
Document Number: 71429
S-83043-Rev. C, 22-Dec-08
www.vishay.com
1
 ▷