BQ27532-G1 Datasheet, PDF (9/35 Pages) Texas Instruments – Battery Management Unit Impedance Track Fuel Gauge

www.ti.com
7 Detailed Description
bq27532-G1
SLUSBU6B – SEPTEMBER 2014 – REVISED JANUARY 2016
7.1 Overview
The fuel gauge accurately predicts the battery capacity and other operational characteristics of a single, Li-
based, rechargeable cell. It can be interrogated by a system processor to provide cell information, such as
remaining capacity and state-of-charge (SOC) as well as SOC interrupt signal to the host.
The fuel gauge can control a bq2425x Charger IC without the intervention from an application system processor.
Using the bq27532-G1 and bq2425x chipset, batteries can be charged with the typical constant-current,
constant-voltage (CCCV) profile or charged using a Multi-Level Charging (MLC) algorithm.
The fuel gauge can also be configured to suggest charge voltage and current values to the system so that the
host can control a charger that is not part of the bq2425x charger family.
NOTE
Formatting conventions used in this document:
Commands: italics with parentheses and no breaking spaces, for example, Control( )
Data flash: italics, bold, and breaking spaces, for example, Design Capacity
Register bits and flags: brackets and italics, for example, [TDA]
Data flash bits: brackets, italics and bold, for example, [LED1]
Modes and states: ALL CAPITALS, for example, UNSEALED mode
Copyright © 2014–2016, Texas Instruments Incorporated
Product Folder Links: bq27532-G1
Submit Documentation Feedback
9