BQ27532-G1 Datasheet, PDF (15/35 Pages) Texas Instruments – Battery Management Unit Impedance Track Fuel Gauge

www.ti.com
Device Functional Modes (continued)
bq27532-G1
SLUSBU6B – SEPTEMBER 2014 – REVISED JANUARY 2016
Exit From HIBERNATE
Battery Removed
POR
Exit From HIBERNATE
Communication Activity
AND Comm address is for fuel gauge
Fuel gauge clears CONTROL_STATUS
[HIBERNATE] = 0
Recommend Host also set
CONTROL_STATUS
[HIBERNATE] = 0
BAT INSERT CHECK
Check for battery insertion
from HALT state.
No gauging
Exit From SLEEP
Flags [BAT_DET] = 0
Flags [BAT_DET] = 0
Entry To NORMAL
Flags [BAT_DET] = 1
Exit From NORMAL
Flags [BAT_DET] = 0
NORMAL
Fuel gauging and data
updated every second.
HIBERNATE
Disable all fuel gauge
subcircuits.
Wakeup From HIBERNATE
Communication Activity
AND
Comm address is not for
fuel gauge.
Exit From WAIT_HIBERNATE
Host must set CONTROL_STATUS
[HIBERNATE] = 0
AND
V_CELL < Hibernate Voltage
To SLEEP
Exit From WAIT_HIBERNATE
Cell relaxed
AND
Ι AverageCurrent () Ι < Hibernate
Current
OR
Cell relaxed
AND
V_CELL < Hibernate Voltage
WAIT_HIBERNATE
Fuel gauging and data
updated every 20 seconds.
Exit From SLEEP
Host has set CONTROL_STATUS
[HIBERNATE] = 1
OR
V_CELL < Hibernate Voltage
System Shutdown
Figure 7. Power Mode Diagram—System Shutdown
Copyright © 2014–2016, Texas Instruments Incorporated
Product Folder Links: bq27532-G1
Submit Documentation Feedback
15