TM4C1233E6PM Datasheet, PDF (809/1214 Pages) Texas Instruments – Tiva Microcontroller

Tiva^™ TM4C1233E6PM Microcontroller
Bit/Field
11:8
Name
EM2
Type
RW
Reset
0x0
Description
SS2 Trigger Select
This field selects the trigger source for Sample Sequencer 2.
The valid configurations for this field are:
Value
0x0
0x1
0x2
0x3
0x4
Event
Processor (default)
The trigger is initiated by setting the SSn bit in the ADCPSSI
register.
Analog Comparator 0
This trigger is configured by the Analog Comparator Control
0 (ACCTL0) register (page 1137).
Analog Comparator 1
This trigger is configured by the Analog Comparator Control
1 (ACCTL1) register (page 1137).
reserved
External (GPIO Pins)
This trigger is connected to the GPIO interrupt for the
corresponding GPIO (see “ADC Trigger Source” on page 629).
Note:
GPIOs that have AINx signals as alternate
functions can be used to trigger the ADC. However,
the pin cannot be used as both a GPIO and an
analog input.
0x5
Timer
In addition, the trigger must be enabled with the TnOTE bit
in the GPTMCTL register (page 711).
0x6
reserved
0x7
reserved
0x8
reserved
0x9
reserved
0xA-0xE reserved
0xF
Always (continuously sample)
June 12, 2014
809
Texas Instruments-Production Data