MSP430F530X_12 Datasheet, PDF (72/100 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F530x, MSP430F5310
SLAS677C – SEPTEMBER 2010 – REVISED SEPTEMBER 2012
Port P3, P3.0 to P3.4, Input/Output With Schmitt Trigger
P3REN.x
Pad Logic
www.ti.com
P3DIR.x
From module
P3OUT.x
From module
P3SEL.x
P3IN.x
To module
0
1
0
1
EN
D
Direction
0: Input
1: Output
DV_SS
0
DV_CC
1
1
P3DS.x
0: Low drive
1: High drive
P3.0/UCB0SIMO/UCB0SDA
P3.1/UCB0SOMI/UCB0SCL
P3.2/UCB0CLK/UCA0STE
P3.3/UCA0TXD/UCA0SIMO
P3.4/UCA0RXD/UCA0SOMI
Table 48. Port P3 (P3.0 to P3.7) Pin Functions
PIN NAME (P3.x)
x
FUNCTION
P3.0/UCB0SIMO/UCB0SDA
P3.1/UCB0SOMI/UCB0SCL
P3.2/UCB0CLK/UCA0STE
P3.3/UCA0TXD/UCA0SIMO
P3.4/UCA0RXD/UCA0SOMI
0 P3.0 (I/O)
UCB0SIMO/UCB0SDA^{(2) (3)}
1 P3.1 (I/O)
UCB0SOMI/UCB0SCL^{(2) (3)}
2 P3.2 (I/O)
UCB0CLK/UCA0STE^{(2) (4)}
3 P3.3 (I/O)
UCA0TXD/UCA0SIMO ⁽²⁾
4 P3.4 (I/O)
UCA0RXD/UCA0SOMI ⁽²⁾
CONTROL BITS AND
SIGNALS ⁽¹⁾
P3DIR.x
P3SEL.x
I: 0; O: 1
0
X
1
I: 0; O: 1
0
X
1
I: 0; O: 1
0
X
1
I: 0; O: 1
0
X
1
I: 0; O: 1
0
X
1
(1) X = Don't care
(2) The pin direction is controlled by the USCI module.
(3) If the I2C functionality is selected, the output drives only the logical 0 to V_SS level.
(4) UCB0CLK function takes precedence over UCA0STE function. If the pin is required as UCB0CLK input or output, USCI A0 is forced to
3-wire SPI mode if 4-wire SPI mode is selected.
72
Submit Documentation Feedback
Copyright © 2010–2012, Texas Instruments Incorporated