MSP430F530X_12 Datasheet, PDF (52/100 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F530x, MSP430F5310
SLAS677C – SEPTEMBER 2010 – REVISED SEPTEMBER 2012
www.ti.com
PMM, SVS High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
I_(SVSH)
SVS current consumption
SVSHE = 0, DV_CC = 3.6 V
SVSHE = 1, DV_CC = 3.6 V, SVSHFP = 0
SVSHE = 1, DV_CC = 3.6 V, SVSHFP = 1
SVSHE = 1, SVSHRVL = 0
0
nA
200
1.5
µA
1.57
1.68
1.78
V_{(SVSH_IT–)}
SVS_H on voltage level⁽¹⁾
SVSHE = 1, SVSHRVL = 1
SVSHE = 1, SVSHRVL = 2
1.79
1.88
1.98
V
1.98
2.08
2.21
SVSHE = 1, SVSHRVL = 3
2.10
2.18
2.31
SVSHE = 1, SVSMHRRL = 0
1.62
1.74
1.85
SVSHE = 1, SVSMHRRL = 1
1.88
1.94
2.07
SVSHE = 1, SVSMHRRL = 2
2.07
2.14
2.28
V_{(SVSH_IT+)}
SVS_H off voltage level⁽¹⁾
SVSHE = 1, SVSMHRRL = 3
SVSHE = 1, SVSMHRRL = 4
2.20
2.30
2.42
V
2.32
2.40
2.55
SVSHE = 1, SVSMHRRL = 5
2.52
2.70
2.88
SVSHE = 1, SVSMHRRL = 6
2.90
3.10
3.23
SVSHE = 1, SVSMHRRL = 7
2.90
3.10
3.23
t_pd(SVSH)
SVS_H propagation delay
SVSHE = 1, dV_DVCC/dt = 10 mV/µs,
SVSHFP = 1
SVSHE = 1, dV_DVCC/dt = 1 mV/µs,
SVSHFP = 0
2.5
µs
20
t_(SVSH)
SVS_H on or off delay time
SVSHE = 0 → 1
SVSHFP = 1
SVSHE = 0 → 1
SVSHFP = 0
12.5
µs
100
dV_DVCC/dt
DV_CC rise time
0
1000 V/s
(1) The SVS_H settings that are available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply
Voltage Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) for recommended settings and use.
52
Submit Documentation Feedback
Copyright © 2010–2012, Texas Instruments Incorporated