DS90CP04_14 Datasheet, PDF (6/25 Pages) Texas Instruments – DS90CP04 1.5 Gbps 4x4 LVDS Crosspoint Switch

DS90CP04
SNLS154I – JANUARY 2002 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
CMOS/TTL Input Voltage
LVDS Receiver Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Current
Junction Temperature
Storage Temperature
Lead Temperature
(Soldering, 4 sec.)
Maximum Package Power Dissipation at 25°C
WQFN-32
Derating above 25°C
Thermal Resistance, θ_JA
ESD Rating
HBM, 1.5 kΩ, 100 pF
LVDS Outputs
LVDS Inputs
All Other Pins
EIAJ, 0Ω, 200 pF
−0.3V to +3V
−0.3V to (V_DD +0.3V)
−0.3V to +3.3V
−0.3V to +3V
40mA
+150°C
−65°C to +150°C
+260°C
3200 mW
38 mW/°C
26.4°C/W
>1.0 kV
>1.5 kV
>4.0 kV
>100V
(1) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(2) “Absolute Maximum Ratings” are the ratings beyond which the safety of the device cannot be ensured. They are not meant to imply that
the device should be operated at these limits.
Recommended Operating Conditions
Supply Voltage (V_DD– GND)
Receiver Input Voltage
Operating Free Air Temperature
Junction Temperature
Min
Typ
Max
Unit
2.375
2.5
2.625
V
0.05
3.3
V
−40
25
85
°C
110
°C
Electrical Characteristics
Over recommended operating supply and temperature ranges unless other specified. ⁽¹⁾
Symbol
Parameter
Conditions
Min
Typ ⁽²⁾
Max
LVCMOS/LVTTL DC SPECIFICATIONS (SCLK, SI/SEL1, SEL0, LOAD, MODE , CSCLK, RSCLK, CSO, RSO)
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IH
High Level Input Current
V_IN = V_DD = V_DDMAX
I_IL
Low Level Input Current
V_IN = V_SS, V_DD = V_DDMAX
C_IN1
Input Capacitance
Any Digital Input Pin to V_SS
C_OUT1
Output Capacitance
Any Digital Output Pin to V_SS
V_CL
Input Clamp Voltage
I_CL = −18 mA
V_OH
High Level Output Voltage
I_OH = −4.0 mA, V_DD = V_DDMIN
I_OH = −100 µA, V_DD = 2.5V
V_OL
Low Level Output Voltage
I_OL = 4.0 mA, V_DD = V_DDMIN
I_OL = 100 µA, V_DD = 2.5V
LVDS INPUT DC SPECIFICATIONS (IN1±, IN2±, IN3±, IN4±)
1.7
V_DD
GND
0.7
−10
+10
−10
+10
3.5
5.5
−1.5
−0.8
1.9
2.4
0.4
0.1
Units
V
V
µA
µA
pF
pF
V
V
V
V
V
(1) “Absolute Maximum Ratings” are the ratings beyond which the safety of the device cannot be ensured. They are not meant to imply that
the device should be operated at these limits.
(2) Typical parameters are measured at V_DD = 2.5V, T_A = 25°C. They are for reference purposes, and are not production-tested.
6
Submit Documentation Feedback
Copyright © 2002–2013, Texas Instruments Incorporated
Product Folder Links: DS90CP04