|
TLC8044 Datasheet, PDF (5/32 Pages) Texas Instruments – 12-BIT ANALOG-TO-DIGITAL INTERFACE FOR CHARGE-COUPLED DEVICE IMAGE SENSORS FOR SCANNERS | |||
|
◁ |
TLC8044
12-BIT ANALOG-TO-DIGITAL INTERFACE FOR
CHARGE-COUPLED DEVICE IMAGE SENSORS FOR SCANNERS
SLAS128 â JUNE 1997
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)â
Supply voltage, DVDD1, DVDD2, AVDD, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Digital inputs (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â 0.3 V to VDD + 0.3 V
Analog inputs (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â 0.3 V to VCC + 0.3 V
Digital outputs, maximum external voltage applied (see Note 1) . . . . . . . . . . . . . . . . . . â 0.3 V to VCC + 0.3 V
Reference input (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â 0.3 V to VDD + 0.3 V
Operating temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â 50°C to 150°C
Lead temperature, soldering, 10 sec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
â Stresses beyond those listed under âabsolute maximum ratingsâ may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under ârecommended operating conditionsâ is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: Voltages applied to DVDD1 and DVDD2 are measured with respect to the DGND terminal. AVDD is measured with respect to the AGND
terminal. For the following specifications, unless otherwise noted, AGND and DGND are tied togather (and represent 0 volts) and are
referred to simply as GND. When the voltages applied to DVDD1, DVDD2, and AVDD are equal, they are referred to simply as VDD, unless
otherwise noted.
recommended operating conditions
total device
Supply voltage, VCC
digital inputs
High-level input voltage, VIH
Low-level input voltage, VIL
input multiplexer
Setup time, input video before MCLKâ, tsu(V)
Hold time, input video after MCLKâ, th(V)
Setup time, reset video before MCLKâ, tsu(R)
Hold time, reset video after MCLKâ, th(R)
serial interface
Cycle time, MCLK, tcyc1
Pulse duration, MCLK high, tw1(MCLKH)
Pulse duration, MCLK low, tw2(MCLKL)
Setup time, VSMPâ to MCLKâ, tsu(D)
Hold time, MCLKâ to VSMPâ, th(D)
Setup time, POC/PCS to MCLKâ, tsu(P)
Hold time, MCLKâ to POC/PCS, th(P)
Cycle time, SCK, tcyc2
Pulse duration, SCK high, tw3(SCKH)
Pulse duration, SCK low, tw4(SCKL)
Setup time, SDI to MCLKâ, tsu(S)
Hold time, MCLKâ to SDI change, th(S)
Setup time, SCKâ to SENâ, tsu(SCE)
Setup time, SENâ to SCKâ, tsu(SEC)
Pulse duration, SEN high, tw(SEN)
MIN NOM MAX UNIT
4.75
5.25 V
MIN
0.9 VDD
NOM MAX
0.1 VDD
UNIT
V
V
TEST CONDITIONS
CDS mode only
CDS mode only
MIN NOM MAX UNIT
10
ns
25
ns
10
ns
25
ns
MIN NOM MAX UNIT
83.3
ns
37.5
ns
37.5
ns
10
ns
10
ns
10
ns
30
ns
83.3
ns
37.5
ns
37.5
ns
10
ns
10
ns
20
ns
20
ns
50
ns
⢠POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5
|
▷ |