CC2560A_16 Datasheet, PDF (43/51 Pages) Texas Instruments – Dual-Mode Bluetooth Controller

www.ti.com
CC2560A NRND; CC2564 NRND
CC2560A, CC2560B, CC2564, CC2564B
SWRS121E – JULY 2012 – REVISED JANUARY 2016
9.2.2 Empty Tape Portion
Figure 9-2 shows the empty portion of the carrier tape.
Empty portion
Device on tape portion
Empty portion
End
Start
270-mm MIN
User direction of feed
Figure 9-2. Carrier Tape and Pockets
The length is to extend
so that no unit is visible
on the outer layer of tape.
swrs064-001
9.2.3 Device Quantity and Direction
When pulling out the tape, the A1 corner is on the left side (see Figure 9-3).
Carrier tape Sprocket hole
A1 corner
Cover tape
Embossment
User direction of feed
Figure 9-3. Direction of Device
9.2.4 Insertion of Device
Figure 9-4 shows the insertion of the device.
SWRS115-021
insert_swrs064
Figure 9-4. Insertion of Device
9.2.5 Tape Specification
The dimensions of the tape are:
• Tape width: 16 mm
• Cover tape: The cover tape does not cover the index hole and does not shift to outside from the carrier
tape.
• Tape structure: The carrier tape is made of plastic. The device is put in the embossed area of the
carrier tape and covered by the cover tape, which is made of plastic.
Copyright © 2012–2016, Texas Instruments Incorporated
Mechanical, Packaging, and Orderable Information
43
Submit Documentation Feedback
Product Folder Links: CC2560A CC2560B CC2564 CC2564B