LMH6702QML_17 Datasheet, PDF (4/17 Pages) Texas Instruments – 1.7 GHz, Ultra Low Distortion, Wideband Op Amp

LMH6702QML
SNOSAQ2E – JULY 2005 – REVISED MARCH 2013
www.ti.com
LMH6702 Electrical Characteristics Drift Values Parameters⁽¹⁾
The following conditions apply, unless otherwise specified.
R_L = 100Ω, V_CC = ±5V_DC, A_V = +2 feedback resistor (R_F) = 250Ω, gain resistor (R_G) = 250Ω
"Delta not required on B level product. Delta required for S-level product at Group B5 only, or as specified on the Internal
Processing Instruction (IPI)."
Symbol
Parameter
Conditions
Notes Min Max Unit
Sub-
groups
I_BN
Input Bias Current Noninverting
I_BI
Input Bias Current Inverting
V_IO
Input Offset Voltage
-0.3 +0.3
μA
1
-3.0 +3.0
μA
1
-0.3 +0.3
mV
1
(1) The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table.
Negative cur rent shall be defined as convential current flow out of a device terminal.
1
GAIN
0
-30
A_V = -1
A_V = -2 _-80
-1
-2 ^PHASE
-130
-180
-3
-230
-4
A_V = -4
-280
-5 _{VOUT = 2VPP}
-6 ^RF ^{= 237:}
A_V = -10
R_L = 100:
-7
1M
10M
100M
FREQUENCY (Hz)
-330
-380
-430
1G
Figure 3. Inverting Frequency Response
4
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LMH6702QML