 English |
|
|
|
|
|
|
|
| BQ25703A Datasheet, PDF (39/81 Pages) Texas Instruments – I2C Multi-Chemistry Battery Buck-Boost Charge Controller With System Power Monitor and Processor Hot Monitor | |||
| |||
| ◁ |
www.ti.com
bq25703A
SLUSCU1 â MAY 2017
Table 10. ChargeOption2 Register (I2C address = 32h) Field Descriptions
I2C
32h
FIELD
7 EN_EXTILIM
6 EN_ICHG
_IDCHG
5 Q2_OCP
4 ACX_OCP
3 EN_ACOC
2 ACOC_VTH
1 EN_BATOC
0 BATOC_VTH
TYPE
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
RESET
1b
0b
1b
1b
0b
1b
1b
1b
DESCRIPTION
Enable ILIM_HIZ pin to set input current limit
0b: Input current limit is set by REG0x0F/0E.
1b: Input current limit is set by the lower value of ILIM_HIZ pin and
REG0x0F/0E. <default at POR>
0b: IBAT pin as discharge current. <default at POR>
1b: IBAT pin as charge current.
Q2 OCP threshold by sensing Q2 VDS
0b: 210 mV
1b: 150 mV <default at POR>
Input current OCP threshold by sensing ACP-ACN.
0b: 280 mV
1b: 150 mV <default at POR>
ACOC Enable
Input overcurrent (ACOC) protection by sensing the voltage across ACP
and ACN. Upon ACOC (after 100-µs blank-out time), converter is
disabled.
0b: Disable ACOC <default at POR>
1b: ACOC threshold 125% or 200% ICRIT
ACOC Limit
Set MOSFET OCP threshold as percentage of IDPM with current sensed
from RAC.
0b: 125% of ICRIT
1b: 210% of ICRIT <default at POR>
BATOC Enable
Battery discharge overcurrent (BATOC) protection by sensing the voltage
across SRN and SRP. Upon BATOC, converter is disabled.
0b: Disable BATOC
1b: BATOC threshold 125% or 200% PROCHOT IDCHG <default at
POR>
Set battery discharge overcurrent threshold as percentage of PROCHOT
battery discharge current limit.
0b: 125% of PROCHOT IDCHG
1b: 200% of PROCHOT IDCHG <default at POR>
Copyright © 2017, Texas Instruments Incorporated
Submit Documentation Feedback
39
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese