CC1350 Datasheet, PDF (34/52 Pages) Texas Instruments – SimpleLink Ultra-Low-Power Dual-Band Wireless MCU

CC1350
SWRS183 – JUNE 2016
www.ti.com
Table 6-1. GPIOs Connected to the Sensor Controller⁽¹⁾
ANALOG
CAPABLE
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
7-mm × 7-mm RGZ
DIO NUMBER
30
29
28
27
26
25
24
23
7
6
5
4
3
2
1
6.5 Memory
(1) Up to 15 pins can be connected to the Sensor Controller. Up to eight
of these pins can be connected to analog modules.
The flash memory provides nonvolatile storage for code and data. The flash memory is in-system
programmable.
The SRAM (static RAM) is split into two 4-KB blocks and two 6-KB blocks and can be used to both store
data and execute code. Retention of the RAM contents in standby mode can be enabled or disabled
individually for each block to minimize power consumption. In addition, if flash cache is disabled, the 8-KB
cache can be used as general-purpose RAM.
The ROM provides preprogrammed, embedded TI-RTOS kernel and Driverlib. The ROM also contains a
bootloader that can be used to reprogram the device using SPI or UART.
6.6 Debug
The on-chip debug support is done through a dedicated cJTAG (IEEE 1149.7) or JTAG (IEEE 1149.1)
interface.
34
Detailed Description
Submit Documentation Feedback
Product Folder Links: CC1350
Copyright © 2016, Texas Instruments Incorporated