DS64EV100_14 Datasheet, PDF (3/15 Pages) Texas Instruments – Programmable Single Equalizer

DS64EV100
www.ti.com
SNLS232D – OCTOBER 2007 – REVISED APRIL 2008
Absolute Maximum Ratings ⁽¹⁾
If Military/Aerospace specified devices are required, please contact the National Semiconductor sales
offices/distributors for availability and specifications.
Supply Voltage (V_DD)
CMOS Input Voltage
−0.5V to +4V
−0.5V to +4.0V
CMOS Output Voltage
−0.5V to +4.0V
CML Input/Output Voltage
−0.5V to +4.0V
Junction Temperature
+150°C
Storage Temperature
−65°C to +150°C
Lead Temperature
Soldering, 4 sec
+260°C
ESD Rating
HBM, 1.5 kΩ, 100 pF
> 8 kV
EIAJ, 0Ω, 200 pF
> 250 V
Thermal Resistance, θ_JA,
No Airflow
40 °C/W
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. Absolute
Maximum Numbers are guaranteed for a junction temperature range of –40°C to +125°C. Models are validated to Maximum Operating
Voltages only.
Recommended Operating Conditions
Supply Voltage (Note 9)
V_DD2.5 to GND
V_DD3.3 to GND
Ambient Temperature
Min
Typ
2.375
2.5
3.0
3.3
−40
25
Max
2.625
3.6
+85
Units
V
V
°C
Electrical Characteristics
Over recommended operating supply and temperature ranges unless other specified. ^{(1) (2)}
Symbol
Parameter
POWER
P
Power Supply
Consumption
N
Supply Noise
Tolerance ⁽²⁾
LVTTL DC SPECIFICATIONS
V_IH
High Level Input
Voltage
V_IL
Low Level Input
Voltage
Conditions
V_DD3.3
V_DD2.5
50 Hz – 100 Hz
100 Hz – 10 MHz
10 MHz – 1.6 GHz
V_DD2.5
V_DD3.3
Min
1.6
2.0
−0.3
Typ
(1)
Max
Units
140
200
mW
100
150
mW
100
mV_P-P
40
mV_P-P
10
mV_P-P
V_DD2.5
V
V_DD3.3
V
0.8
V
(1) Typical values represent most likely parametric norms at V_DD = 3.3V or 2.5V, T_A = 25°C., and at the Recommended Operation
Conditions at the time of product characterization and are not guaranteed.
(2) The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not guaranteed.
(1) Typical values represent most likely parametric norms at V_DD = 3.3V or 2.5V, T_A = 25°C., and at the Recommended Operation
Conditions at the time of product characterization and are not guaranteed.
(2) Allowed supply noise (mV_P-P sine wave) under typical conditions.
Copyright © 2007–2008, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS64EV100