TLC082-Q1_16 Datasheet, PDF (22/38 Pages) Texas Instruments – Wide-Bandwidth High-Output-Drive Single-Supply Operational Amplifiers

TLC082-Q1, TLC084-Q1
SLOS510D – SEPTEMBER 2006 – REVISED AUGUST 2016
Typical Applications (continued)
9.2.2 Dual-Supply Typical Application
The dual-supply application has a gain of 10 and a bandwidth of 1 MHz.
9K
V_DD
IK
–
IK
V_IN
+
0.1 µF
V_OUT
50 W
www.ti.com
–V_DD
Figure 46. Dual Supply Typical Application Schematic
9.2.2.1 Design Requirements
Use the following parameters for this design example:
• Noninverting configuration with gain of 10 or 20 dB
• Dual supply minimum: ±2.25 V
• Dual supply maximum: ±8 V
• Output common mode minimum should be higher than output level V_OL
• Output common mode maximum should be lower than output level V_OH
• Unity gain bandwidth: 10 MHz
• Maximum input signal frequency is 1 MHz for less than 3-dB attenuation at 1 MHz
• Output load current lower than 60 mA
9.2.2.2 Detailed Design Procedure
For this example, see Detailed Design Procedure in TLC08x-Q1 Single-Supply Typical Application.
22
Submit Documentation Feedback
Copyright © 2006–2016, Texas Instruments Incorporated
Product Folder Links: TLC082-Q1 TLC084-Q1