TLC082-Q1_16 Datasheet, PDF (1/38 Pages) Texas Instruments – Wide-Bandwidth High-Output-Drive Single-Supply Operational Amplifiers

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TLC082-Q1, TLC084-Q1
SLOS510D – SEPTEMBER 2006 – REVISED AUGUST 2016
TLC08x-Q1 Wide-Bandwidth High-Output-Drive Single-Supply Operational Amplifiers
1 Features
•1 Wide Bandwidth: 10 MHz
• High-Output Drive
– I_OH: 57 mA at V_DD –1.5 V
– I_OL: 55 mA at 0.5 V
• High Slew Rate
– SR+: 16 V/μs
– SR−: 19 V/μs
• Wide Supply Range: 4.5 V to 16 V
• Supply Current: 1.9 mA per Channel
• Low Input Noise Voltage: 8.5 nV√Hz
• Input Offset Voltage: 60 μV
• Ultra-Small 8-Pin MSOP-PowerPAD Package for
TLC082-Q1
2 Applications
• Automotive
• Blind Spot Detection
• Engine Control Units
• Electric Mirrors
• HVAC
• Steering
• Collision Warnings
• Telematics
• Clusters
• Audio
• Industrial
• Instrumentations
3 Description
The TLC08x-Q1 is the first general purpose
operational amplifier to highlight TI's BiCMOS
technology. The BiMOS family concept is simple:
provide an upgrade path for BiFET users who are
moving away from dual-supply to single-supply
systems and demand higher AC and DC
performance. With performance rated from 4.5 V to
16 V across an automotive temperature range (–40°C
to 125°C), BiMOS suits a wide range of audio,
automotive, industrial, and instrumentation
applications.
Developed in TI’s patented LBC3 BiCMOS process,
the BiMOS amplifiers combine a very high input
impedance, low-noise CMOS front end with a high-
drive bipolar output stage, thus providing the optimum
performance features of both. AC performance
improvements over the TL08x-Q1 BiFET
predecessors include a bandwidth of 10 MHz and
voltage noise of 8.5 nV/√Hz. These features enable
the TLC08x-Q1 devices to be suitable for ADAS
(such as short-range radar) and body in automotive.
The TLC082-Q1 is also suitable in infotainment and
cluster as a pre amp in car audio applications.
DC improvements include an ensured V_ICR that
includes ground, a factor of four reduction in input
offset voltage down to 1.5 mV (maximum), and a
power-supply rejection improvement of greater than
40 dB to 130 dB. Added to this list of impressive
features is the ability to drive ±50-mA loads
comfortably from an ultrasmall-footprint MSOP
PowerPAD™ package, which positions the TLC08x-
Q1 as the ideal high-performance, general-purpose
operational amplifier family.
PART NUMBER
TLC082-Q1
TLC084-Q1
Device Information⁽¹⁾
PACKAGE
BODY SIZE (NOM)
MSOP-PowerPAD (8) 3.00 mm × 3.00 mm
HTSSOP (20)
6.50 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Operational Amplifier
−
+
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.