DS125BR800A Datasheet, PDF (22/53 Pages) Texas Instruments – Low-Power 12.5-Gbps 8-Channel (Unidirectional) Repeater With Input Equalization

DS125BR800A
SNLS467 – NOVEMBER 2013
www.ti.com
5. The Host drive the 8-bit data byte.
6. The Device drives an ACK bit ("0").
7. The Host drives a STOP condition.
The WRITE transaction is completed, the bus goes IDLE and communication with other SMBus devices may
now occur.
READING A REGISTER
To read a register, the following protocol is used (see SMBus 2.0 specification).
1. The Host drives a START condition, the 7-bit SMBus address, and a "0" indicating a WRITE.
2. The Device (Slave) drives the ACK bit ("0").
3. The Host drives the 8-bit Register Address.
4. The Device drives an ACK bit ("0").
5. The Host drives a START condition.
6. The Host drives the 7-bit SMBus Address, and a "1" indicating a READ.
7. The Device drives an ACK bit "0".
8. The Device drives the 8-bit data value (register contents).
9. The Host drives a NACK bit "1"indicating end of the READ transfer.
10. The Host drives a STOP condition.
The READ transaction is completed, the bus goes IDLE and communication with other SMBus devices may now
occur.
See Table 11 for more information.
22
Submit Documentation Feedback
Product Folder Links: DS125BR800A
Copyright © 2013 , Texas Instruments Incorporated