|
DRV8412_11 Datasheet, PDF (22/31 Pages) Texas Instruments – Dual Full Bridge PWM Motor Driver | |||
|
◁ |
DRV8412
DRV8432
SLES242D â DECEMBER 2009 â REVISED JULY 2011
www.ti.com
B1: Do not block the heat transfer path at bottom side. Clear as much space as possible for better heat spreading.
Figure 15. Printed Circuit Board â Bottom Layer
THERMAL INFORMATION
The thermally enhanced package provided with the DRV8432 is designed to interface directly to heat sink using
a thermal interface compound, (e.g., Ceramique from Arctic Silver, TIMTronics 413, etc.). The heat sink then
absorbs heat from the ICs and couples it to the local air. It is also a good practice to connect the heatsink to
system ground on the PCB board to reduce the ground noise.
RθJA is a system thermal resistance from junction to ambient air. As such, it is a system parameter with the
following components:
⢠RθJC (the thermal resistance from junction to case, or in this example the power pad or heat slug)
⢠Thermal grease thermal resistance
⢠Heat sink thermal resistance
22
Copyright © 2009â2011, Texas Instruments Incorporated
|
▷ |