TC217_08 Datasheet, PDF (19/21 Pages) Texas Instruments – pixel ccd image sensor

ą
TC217
1158ĆĂ×Ă488ĆPIXEL CCD IMAGE SENSOR
ą
SOCS015C − OCTOBER 1989 − REVISED JUNE 1996
MECHANICAL DATA
The package for the TC217 consists of a ceramic base, a glass window, and a 22-lead frame. The package leads
are configured in a dual in-line organization and fit into mounting holes with 2.54 mm (0.10 inch) center-to-center
spacings. The glass window is sealed to the package by an epoxy adhesive. It can be cleaned by any standard
procedure for cleaning optical assemblies or by wiping the surface with a cotton swab moistened with alcohol.
Optical Center
2,01 (0.079)
Optical CL
(see Note B)
9,35 (0.368)
REF
Index Dot
18,54
(0.730)
MAX
0,25 (0.010)
23,39 (0.921)
8,00 (0.315)
27,81 (1.095) MAX
2,01 x 2,39
(0.079 x 0.094)
18,24
(0.718)
3,86 (0.152) MAX
2,21 (0.087)
10,16 (0.400) TYP
0,46 (0.018)
2,54 (0.100)
5,50 ± 0,76
(0.217 ± 0.030)
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES
7/94
NOTES: A. Single dimensions are nominal.
B. The center of the package and the center of the image area are not coincident.
C. The distance from the top of the glass to the image sensor surface is typically 1,46 mm (0.057 inch). The glass is 0,95 ±0,08 mm
and has an index of refraction of 1.53.
D. Each pin centerline is located within 0,25 mm (0.010 inch) of its true longitudinal position.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
19