|
TLC320AC01C_15 Datasheet, PDF (18/92 Pages) Texas Instruments – Single-Supply Analog Interface Circuit | |||
|
◁ |
[ (B register)/2] FCLK Periodsâ
ÃÃÃÃÃÃ Frame-Sync Interval
ÃÃÃÃÃÃ (primary communication)
SCLK
FS
ÃÃÃÃÃÃÃÃ 16 SCLKs
ÃÃÃÃÃÃ Frame-Sync Interval
ÃÃÃÃÃÃ (secondary
communication)
ÃÃÃÃÃÃ 16 SCLKs
DOUT
ADC Conversion Result
ÃÃÃÃÃÃÃÃ Register Read Data or All 0s
DIN
DAC Input Data
ÃÃÃ
ÃÃ Control and Device Parameter
Data
â The time between the primary and secondary frame sync is the time equal to filter clock (FCLK) period multiplied by the
B-register contents divided by two. The time interval is rounded to the nearest shift clock. The secondary frame-sync
signal goes from high to low on the next shift clock low-to-high transition after (B register/2) filter clock periods.
Figure 2â1. Functional Sequence for Primary and Secondary Communication
2.7 Number of Slaves
The maximum number of slaves is determined by the sum of the individual device delays from the
frame-sync (FS) input low to the frame-sync delayed (FSD) low for all slaves according to equation 1:
(n) / tp(FS â FSD) < 1/2 shift-clock period
(1)
Where:
n is the number of slave devices.
Example:
From equation 1 above, the number of slaves is given by equation 2:
v * (n)
1
2
x (SCLK period) x tp(FS
1
FSD)
(2)
assuming the master clock is 10.368 MHz and the shift clock is 2.5965 MHz and tp(FS â FSD) is 40 ns, then
according to equation 3, the number of slaves is:
v + + n
1
2.5965 MHz
x
1
2
x
1
40 ns
1000
192
4.8
(3)
The maximum number of slaves under these conditions is four.
2â5
|
▷ |