 English |
|
|
|
|
|
|
|
| CC3120MOD Datasheet, PDF (13/52 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Network Processor Internet-of-Things Module Solution for MCU Applications | |||
| |||
| ◁ |
www.ti.com
CC3120MOD
SWRS205 â MARCH 2017
5.5 Current Consumption Summary
TA = 25°C, VBAT = 3.6 V
PARAMETER
TEST CONDITIONS(1) (2)
MIN
TYP
MAX UNIT
TX power level = 0
272
1 DSSS
TX power level = 4
188
TX power level = 0
248
TX
6 OFDM
mA
TX power level = 4
179
TX power level = 0
223
54 OFDM
TX power level = 4
160
RX (3)
Idle connected(4)
1 DSSS
54 OFDM
53
mA
53
715
µA
LPDS
115
µA
Hibernate
6
µA
Shutdown
1
µA
Peak calibration current(3)(5)
VBAT = 3.3 V
VBAT = 2.3 V
450
mA
620
(1) TX power level = 0 implies maximum power (see Figure 5-1, Figure 5-2, and Figure 5-3). TX power level = 4 implies output power
backed off approximately 4 dB.
(2) The CC3120MOD system is a constant power-source system. The active current numbers scale inversely on the VBAT voltage supplied.
(3) The RX current is measured with a 1-Mbps throughput rate.
(4) DTIM = 1
(5) The complete calibration can take up to 17 mJ of energy from the battery over a time of 24 ms. In default mode, calibration is performed
sparingly, typically when re-enabling the NWP and when the temperature has changed by more than 20°C. There are two additional
calibration modes that may be used to reduced or completely eliminate the calibration event. For further details, see the CC3120,
CC3220 SimpleLink⢠Wi-Fi® and IoT Network Processor Programmer's Guide.
Copyright © 2017, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC3120MOD
Specifications
13
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese