CC3120MOD Datasheet, PDF (12/52 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Network Processor Internet-of-Things Module Solution for MCU Applications

CC3120MOD
SWRS205 – MARCH 2017
www.ti.com
5 Specifications
All measurements are references of the module pins, unless otherwise indicated. All specifications are
over process and voltage, unless otherwise indicated.
5.1 Absolute Maximum Ratings
These specifications indicate levels where permanent damage to the module can occur. Functional operation is not ensured
under these conditions. Operation at absolute maximum conditions for extended periods can adversely affect long-term
reliability of the module ⁽¹⁾⁽²⁾.
MIN
MAX UNIT
V_BAT
Digital I/O
RF pin
–0.5
–0.5
–0.5
3.8 V
V_BAT + 0.5 V
2.1 V
Analog pins
–0.5
2.1 V
Operating temperature, T_A
Storage temperature, T_stg
Junction temperature, T_j(3)
–40
85 °C
–40
85 °C
120 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to V_SS, unless otherwise noted.
(3) Junction temperature is for the CC3120RNMARGK device that is contained within the module.
5.2 ESD Ratings
V_ESD
Electrostatic discharge (ESD)
performance
Human body model (HBM), per ANSI/ESDA/JEDEC JS001⁽¹⁾
Charged device model (CDM),
per JESD22-C101⁽²⁾
All pins
VALUE
±2000
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
5.3 Power-On Hours (POH)
NOTE
This information is provided solely for your convenience and does not extend or modify the
warranty provided under TI's standard terms and conditions for TI semiconductor products.
CONDITION
POH (hours)
T_A up to 85°C⁽¹⁾
87,600
(1) The TX duty cycle (power amplifier ON time) is assumed to be 10% of the device POH. Of the remaining 90% of the time, the device
can be in any other state.
5.4 Recommended Operating Conditions
Function operation is not ensured outside this limit, and operation outside this limit for extended periods can adversely affect
long-term reliability of the module^(1)(2)(3).
MIN
TYP MAX
UNIT
V_BAT
Operating temperature
2.3
3.3
3.6
V
–40
25
85
°C
Ambient thermal slew
–20
20 °C/minute
(1) When operating at an ambient temperature of over 75°C, the transmit duty cycle must remain below 50% to avoid the auto-protect
feature of the power amplifier. If the auto-protect feature triggers, the device takes a maximum of 60 seconds to restart the transmission.
(2) To ensure WLAN performance, ripple on the 2.3-V to 3.6-V supply must be less than ±300 mV.
(3) The minimum voltage specified includes the ripple on the supply voltage and all other transient dips. The brownout condition is 2.1 V,
and care must be taken when operating at the minimum specified voltage.
12
Specifications
Submit Documentation Feedback
Product Folder Links: CC3120MOD
Copyright © 2017, Texas Instruments Incorporated