LMH6583_14 Datasheet, PDF (1/24 Pages) Texas Instruments – LMH6583 16x8 550 MHz Analog Crosspoint Switch, Gain of 2

LMH6583
www.ti.com
SNOSAP5E – APRIL 2006 – REVISED MARCH 2013
LMH6583 16x8 550 MHz Analog Crosspoint Switch, Gain of 2
Check for Samples: LMH6583
FEATURES
1
•23 16 Inputs and 8 Outputs
• 64-pin Exposed Pad HTQFP Package
– −3 dB Bandwidth (V_OUT = 2 V_PP, R_L = 1 kΩ)
550 MHz
– −3 dB Bandwidth (V_OUT = 2 V_PP,R_L = 150Ω)
450 MHz
• Fast Slew Rate 1800 V/μs
• Channel to Channel Crosstalk (10/ 100 MHz)
−70/ −52 dBc
• All Hostile Crosstalk (10/ 100 MHz) −55/−45
dBc
• Easy to Use Serial Programming 4 Wire Bus
• Two Programming Modes Serial & Addressed
Modes
• Symmetrical Pinout Facilitates Expansion.
• Output Current ±60 mA
• Gain of 1 Version also Available LMH6582
APPLICATIONS
• Studio Monitoring/Production Video Systems
• Conference Room Multimedia Video Systems
• KVM (Keyboard Video Mouse) Systems
• Security/Surveillance Systems
• Multi Antenna Diversity Radio
• Video Test Equipment
• Medical Imaging
• Wide-Band Routers & Switches
DESCRIPTION
The LMH™ family of products is joined by the
LMH6583, a high speed, non-blocking, analog,
crosspoint switch. The LMH6583 is designed for high
speed, DC coupled, analog signals like high
resolution video (UXGA and higher). The LMH6583
has 16 inputs and 8 outputs. The non-blocking
architecture allows an output to be connected to any
input, including an input that is already selected. With
fully buffered inputs the LMH6583 can be impedance
matched to nearly any source impedance. The
buffered outputs of the LMH6583 can drive up to two
back terminated video loads (75Ω load). The outputs
and inputs also feature high impedance inactive
states allowing high performance input and output
expansion for array sizes such as 16 x 16 or 32 x 8
by combining two devices. The LMH6583 is
controlled with a 4 pin serial interface. Both single
serial mode and addressed chain modes are
available.
The LMH6583 comes in a 64-pin thermally enhanced
HTQFP package. It also has diagonally symmetrical
pin assignments to facilitate double sided board
layouts and easy pin connections for expansion.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LMH is a trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated