|
CC2650_16 Datasheet, PDF (1/59 Pages) Texas Instruments – Multistandard Wireless MCU | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
CC2650
SWRS158A â FEBRUARY 2015 â REVISED OCTOBER 2015
CC2650 SimpleLink⢠Multistandard Wireless MCU
1 Device Overview
1.1 Features
1
⢠Microcontroller
â Powerful ARM® Cortex®-M3
â EEMBC CoreMark® Score: 142
â Up to 48-MHz Clock Speed
â 128KB of In-System Programmable Flash
â 8KB of SRAM for Cache
â 20KB of Ultralow-Leakage SRAM
â 2-Pin cJTAG and JTAG Debugging
â Supports Over-The-Air Upgrade (OTA)
⢠Ultralow-Power Sensor Controller
â Can Run Autonomous From the Rest of the
System
â 16-Bit Architecture
â 2KB of Ultralow-Leakage SRAM for Code and
Data
⢠Efficient Code Size Architecture, Placing Drivers,
Bluetooth® Low Energy Controller, IEEE 802.15.4
MAC, and Bootloader in ROM
⢠RoHS-Compliant Packages
â 4-mm à 4-mm RSM VQFN32 (10 GPIOs)
â 5-mm à 5-mm RHB VQFN32 (15 GPIOs)
â 7-mm à 7-mm RGZ VQFN48 (31 GPIOs)
⢠Peripherals
â All Digital Peripheral Pins Can Be Routed to
Any GPIO
â Four General-Purpose Timer Modules
(Eight 16-Bit or Four 32-Bit Timers, PWM Each)
â 12-Bit ADC, 200-ksamples/s, 8-Channel Analog
MUX
â Continuous Time Comparator
â Ultralow-Power Analog Comparator
â Programmable Current Source
â UART
â 2Ã SSI (SPI, MICROWIRE, TI)
â I2C
â I2S
â Real-Time Clock (RTC)
â AES-128 Security Module
â True Random Number Generator (TRNG)
â 10, 15, or 31 GPIOs, Depending on Package
Option
â Support for Eight Capacitive-Sensing Buttons
â Integrated Temperature Sensor
⢠External System
â On-Chip internal DC-DC Converter
1
â Very Few External Components
â Seamless Integration With the SimpleLinkâ¢
CC2590 and CC2592 Range Extenders
â Pin Compatible With the SimpleLink CC13xx in
4-mm à 4-mm and 5-mm à 5-mm VQFN
Packages
⢠Low Power
â Wide Supply Voltage Range
⢠Normal Operation: 1.8 to 3.8 V
⢠External Regulator Mode: 1.7 to 1.95 V
â Active-Mode RX: 5.9 mA
â Active-Mode TX at 0 dBm: 6.1 mA
â Active-Mode TX at +5 dBm: 9.1 mA
â Active-Mode MCU: 61 µA/MHz
â Active-Mode MCU: 48.5 CoreMark/mA
â Active-Mode Sensor Controller: 8.2 µA/MHz
â Standby: 1 µA (RTC Running and RAM/CPU
Retention)
â Shutdown: 100 nA (Wake Up on External
Events)
⢠RF Section
â 2.4-GHz RF Transceiver Compatible With
Bluetooth Low Energy (BLE) 4.1 Specification
and IEEE 802.15.4 PHY and MAC
â Excellent Receiver Sensitivity (â97 dBm for BLE
and â100 dBm for 802.15.4), Selectivity, and
Blocking Performance
â Link budget of 102 dB/105 dB (BLE/802.15.4)
â Programmable Output Power up to +5 dBm
â Single-Ended or Differential RF Interface
â Suitable for Systems Targeting Compliance With
Worldwide Radio Frequency Regulations
⢠ETSI EN 300 328 (Europe)
⢠EN 300 440 Class 2 (Europe)
⢠FCC CFR47 Part 15 (US)
⢠ARIB STD-T66 (Japan)
⢠Tools and Development Environment
â Full-Feature and Low-Cost Development Kits
â Multiple Reference Designs for Different RF
Configurations
â Packet Sniffer PC Software
â Sensor Controller Studio
â SmartRF⢠Studio
â SmartRF Flash Programmer 2
â IAR Embedded Workbench® for ARM
â Code Composer Studioâ¢
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |