LM3S9B90 Datasheet, PDF (603/1185 Pages) Texas Instruments – Stellaris® LM3S9B90 Microcontroller

Stellaris® LM3S9B90 Microcontroller
Register 47: ADC Digital Comparator Range 0 (ADCDCCMP0), offset 0xE40
Register 48: ADC Digital Comparator Range 1 (ADCDCCMP1), offset 0xE44
Register 49: ADC Digital Comparator Range 2 (ADCDCCMP2), offset 0xE48
Register 50: ADC Digital Comparator Range 3 (ADCDCCMP3), offset 0xE4C
Register 51: ADC Digital Comparator Range 4 (ADCDCCMP4), offset 0xE50
Register 52: ADC Digital Comparator Range 5 (ADCDCCMP5), offset 0xE54
Register 53: ADC Digital Comparator Range 6 (ADCDCCMP6), offset 0xE58
Register 54: ADC Digital Comparator Range 7 (ADCDCCMP7), offset 0xE5C
This register defines the comparison values that are used to determine if the ADC conversion data
falls in the appropriate operating region.
Note: The value in the COMP1 field must be greater than or equal to the value in the COMP0 field
or unexpected results can occur.
ADC Digital Comparator Range 0 (ADCDCCMP0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0xE40
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
COMP1
Type RO
RO
RO
RO
RO
RO
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
reserved
COMP0
Type RO
RO
RO
RO
RO
RO
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit/Field
31:26
25:16
15:10
9:0
Name
reserved
COMP1
reserved
COMP0
Type
RO
R/W
RO
R/W
Reset
0x0
0x000
0x0
0x000
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Compare 1
The value in this field is compared against the ADC conversion data.
The result of the comparison is used to determine if the data lies within
the high-band region.
Note that the value of COMP1 must be greater than or equal to the value
of COMP0.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Compare 0
The value in this field is compared against the ADC conversion data.
The result of the comparison is used to determine if the data lies within
the low-band region.
June 14, 2010
603
Texas Instruments-Advance Information