TMS320LF2401A_09 Datasheet, PDF (57/88 Pages) Texas Instruments – DSP CONTROLLERS

TMS320LF2401A, TMS320LC2401A
DSP CONTROLLERS
SPRS161K − MARCH 2001 − REVISED JULY 2007
LF2401A AND LC2401A ELECTRICAL SPECIFICATIONS DATA
This document contains information on products in more than one phase of development. The electrical
specifications for the TMS320LF2401A device are Production Data (PD) and those for the TMS320LC2401A
device are Product Preview (PP). These electrical specifications are subject to change.
absolute maximum ratings over operating temperature range (unless otherwise noted)^†
Supply voltage range, V_DD, V_DDO, and V_CCA (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 0.3 V to 4.6 V
V_CCP range (LF2401A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 0.3 V to 5.5 V
Input voltage range, V_IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 0.3 V to 4.6 V
Output voltage range, V_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 0.3 V to 4.6 V
Input clamp current, I_IK (V_IN < 0 or V_IN > V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA
Output clamp current, I_OK (V_O < 0 or V_O > V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA
Operating ambient temperature ranges, T_A: A version^‡ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 40°C to 85°C
S version^‡ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 65°C to 150°C
† _{Clamp current stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress}
ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
‡ _{Long-term high-temperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall device life.}
For additional information, see IC Package Thermal Metrics Application Report (literature number SPRA953) and Reliability Data for
TMS320LF24x and TMS320F281x Devices Application Report (literature number SPRA963).
NOTE 1: All voltage values are with respect to VSS.
recommended operating conditions^§
MIN
NOM MAX
VDD/VDDO
VSS
VCCA¶
VCCP
fCLKOUT
Supply voltage
Supply ground
ADC supply voltage
Flash programming supply voltage (LF2401A)#
Device clock frequency (system clock)
VDDO = VDD ± 0.3 V
3
3.3
3.6
0
0
0
3
3.3
3.6
4.75
5 5.25
2
40
VIH
High-level input voltage
All inputs
2
VIL
Low-level input voltage
All inputs
0.8
Output pins Group 1||
−2
IOH
High-level output source current, VOH = 2.4 V
Output pins Group 2||
−4
Output pins Group 3||
−8
Output pins Group 1||
2
IOL
Low-level output sink current, VOL = VOL MAX
Output pins Group 2||
4
Output pins Group 3||
8
TA
Ambient temperature
A version
S version
− 40
85
− 40
125
Nf
Flash endurance for the array (Write/erase cycles) − 40°C to 85°C
10K
§ _{See the mechanical data package page for thermal resistance values, ΘJA (junction-to-ambient) and ΘJC (junction-to-case).}
¶ _{VCCA should not exceed VDD by 0.3 V.}
# _{For applications that involve millions of power cycles, it is recommended that VCCP be powered after VDD.}
|| _{Primary signals and their groupings:}
Group 1: PDPINTA/IOPA0, T2PWM, PWM1−PWM6 (IOPA1−IOPA6), IOPB0, IOPB1, OPB5, TMS/XF, RS, TCK, TDI
Group 2: SCITXD/IOPB3, SCIRXD/IOPB4, TDO/IOPB2
Group 3: CAP1, IOPA7, CLKOUT
UNIT
V
V
V
V
MHz
V
V
mA
mA
mA
mA
mA
mA
°C
°C
cycles
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
57