CC430F613X Datasheet, PDF (56/118 Pages) Texas Instruments – MSP430 SoC with RF Core

CC430F613x
CC430F612x
CC430F513x
ECCN 5E002 TSPA - Technology / Software Publicly Available
SLAS554D – MAY 2009 – REVISED JULY 2010
www.ti.com
PMM, SVS Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
SVSLE = 0, PMMCOREV = 2
0
I_(SVSL)
SVS_L current consumption
SVSLE = 1, PMMCOREV = 2, SVSLFP = 0
200
SVSLE = 1, PMMCOREV = 2, SVSLFP = 1
1.5
SVSLE = 1, dV_CORE/dt = 10 mV/µs,
SVSLFP = 1
2.5
t_pd(SVSL)
SVS_L propagation delay
SVSLE = 1, dV_CORE/dt = 1 mV/µs,
SVSLFP = 0
20
t_(SVSL)
SVS_L on/off delay time
SVSLE = 0 → 1, dV_CORE/dt = 10 mV/µs,
SVSLFP = 1
SVSLE = 0 → 1, dV_CORE/dt = 1 mV/µs,
SVSLFP = 0
12.5
100
MAX
UNIT
nA
nA
µA
µs
µs
PMM, SVM Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
SVMLE = 0, PMMCOREV = 2
0
I_(SVML)
SVM_L current consumption
SVMLE= 1, PMMCOREV = 2, SVMLFP = 0
200
SVMLE= 1, PMMCOREV = 2, SVMLFP = 1
1.5
SVMLE = 1, dV_CORE/dt = 10 mV/µs,
SVMLFP = 1
2.5
t_pd(SVML) SVM_L propagation delay
SVMLE = 1, dV_CORE/dt = 1 mV/µs,
SVMLFP = 0
20
t_(SVML)
SVM_L on/off delay time
SVMLE = 0 → 1, dV_CORE/dt = 10 mV/µs,
SVMLFP = 1
SVMLE = 0 → 1, dV_CORE/dt = 1 mV/µs,
SVMLFP = 0
12.5
100
MAX
UNIT
nA
nA
µA
µs
µs
Wake-up from Low Power Modes and Reset
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
t_WAKE-UP-
FAST
Wake-up time from
LPM2, LPM3, or LPM4
to active mode⁽¹⁾
PMMCOREV = SVSMLRRL = n, where n = 0,
1, 2, or 3
SVSLFP = 1
f_MCLK ≥ 4.0 MHz
f_MCLK < 4.0 MHz
t_WAKE-UP-
SLOW
Wake-up time from
LPM2, LPM3 or LPM4 to
active mode⁽²⁾
PMMCOREV = SVSMLRRL = n, where n = 0, 1, 2, or 3
SVSLFP = 0
t_WAKE-UP-
RESET
Wake-up time from RST
or BOR event to active
mode ⁽³⁾
TYP MAX UNIT
5
µs
6
150 165 µs
2 3 ms
(1) This value represents the time from the wakeup event to the first active edge of MCLK. The wakeup time depends on the performance
mode of the low side supervisor (SVS_L) and low side monitor (SVM_L). Fastest wakeup times are possible with SVS_Land SVM_L in full
performance mode or disabled when operating in AM, LPM0, and LPM1. Various options are available for SVS_Land SVM_L while
operating in LPM2, LPM3, and LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the CC430 Family
User's Guide (SLAU259).
(2) This value represents the time from the wakeup event to the first active edge of MCLK. The wakeup time depends on the performance
mode of the low side supervisor (SVS_L) and low side monitor (SVM_L). In this case, the SVS_Land SVM_L are in normal mode (low current)
mode when operating in AM, LPM0, and LPM1. Various options are available for SVS_Land SVM_L while operating in LPM2, LPM3, and
LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the CC430 Family User's Guide (SLAU259).
(3) This value represents the time from the wakeup event to the reset vector execution.
56
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated