DS90CF366 Datasheet, PDF (5/20 Pages) Texas Instruments – 20 to 85 MHz Shift Clock Support, Rx Power Consumption <142 mW (typ) @85MHz Grayscale

www.ti.com
DS90CF366, DS90CF386
SNLS055I – NOVEMBER 1999 – REVISED APRIL 2013
Device Pin Name Signal
Signal Pattern
Signal Frequency
TxCLK IN / RxCLK OUT
Dot Clk
f
TxIN0 / RxOUT0
R0
f / 16
TxIN1 / RxOUT1
R1
f/8
TxIN2 / RxOUT2
R2
f/4
TxIN3 / RxOUT3
R3
f/2
TxIN4 / RxOUT4
R4
Steady State, Low
TxIN5 / RxOUT5
R5
Steady State, Low
TxIN6 / RxOUT6
G0
f / 16
TxIN7 / RxOUT7
G1
f/8
TxIN8 / RxOUT8
G2
f/4
TxIN9 / RxOUT9
G3
f/2
TxIN10 / RxOUT10
G4
Steady State, Low
TxIN11 / RxOUT11
G5
Steady State, Low
TxIN12 / RxOUT12
B0
f / 16
TxIN13 / RxOUT13
B1
f/8
TxIN14 / RxOUT14
B2
f/4
TxIN15 / RxOUT15
B3
f/2
TxIN16 / RxOUT16
B4
Steady State, Low
TxIN17 / RxOUT17
B5
Steady State, Low
TxIN18 / RxOUT18
HSYNC
Steady State, High
TxIN19 / RxOUT19
VSYNC
Steady State, High
TxIN20 / RxOUT20
ENA
Steady State, High
(1) The worst case test pattern produces a maximum toggling of digital circuits, LVDS I/O and CMOS/TTL I/O.
(2) The 16 grayscale test pattern tests device power consumption for a “typical” LCD display pattern. The test pattern
approximates signal switching needed to produce groups of 16 vertical stripes across the display.
(3) Figure 3 and Figure 5 show a falling edge data strobe (TxCLK IN/RxCLK OUT).
(4) Recommended pin to signal mapping. Customer may choose to define differently.
Figure 5. “16 Grayscale” Test Pattern (DS90CF366)
Figure 6. DS90CF386/DS90CF366 (Receiver) CMOS/TTL Output Load and Transition Times
Figure 7. DS90CF386/DS90CF366 (Receiver) Setup/Hold and High/Low Times
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: DS90CF366 DS90CF386