English
Language : 

TCA6408_09 Datasheet, PDF (3/31 Pages) Texas Instruments – LOW-VOLTAGE 8-BIT I2C AND SMBus I/O EXPANDER WITH INTERRUPT OUTPUT, RESET, AND CONFIGURATION REGISTERS
www.ti.com
TCA6408
LOW-VOLTAGE 8-BIT I2C AND SMBus I/O EXPANDER
WITH INTERRUPT OUTPUT, RESET, AND CONFIGURATION REGISTERS
SCPS151C – FEBRUARY 2007 – REVISED JUNE 2007
ZXY Terminal Assignments
1
2
3
4
A
P3
P2
P1
RESET
B
GND
N.C. (1)
P0
N.C. (1)
C
P4
N.C. (1)
INT
N.C. (1)
D
P5
P6
P7
SCL
(1) N.C. – No internal connection
5
ADDR
VCCI
VCCP
SDA
TSSOP
(PW)
PIN NUMBER
QFN
(RGT)
1
15
2
16
3
1
BGA
(ZXY)
B5
A5
A4
4
2
B3
5
3
A3
6
4
A2
7
5
A1
8
6
B1
9
7
C1
10
8
D1
11
9
D2
12
10
D3
13
11
C3
14
12
D4
15
13
D5
16
14
C5
TERMINAL FUNCTIONS
NAME
DESCRIPTION
VCCI
ADDR
RESET
P0
P1
P2
P3
GND
P4
P5
P6
P7
INT
SCL
SDA
VCCP
Supply voltage of I2C bus. Connect directly to the VCC of the external I2C master.
Provides voltage level translation.
Address input. Connect directly to VCCP or ground.
Active-low reset input. Connect to VCCP through a pullup resistor, if no active
connection is used.
P port input/output (push-pull design structure). At power on, P0 is configured as
an input.
P port input/output (push-pull design structure). At power on, P1 is configured as
an input.
P port input/output (push-pull design structure). At power on, P2 is configured as
an input.
P port input/output (push-pull design structure). At power on, P3 is configured as
an input.
Ground
P port input/output (push-pull design structure). At power on, P4 is configured as
an input.
P port input/output (push-pull design structure). At power on, P5 is configured as
an input.
P port input/output (push-pull design structure). At power on, P6 is configured as
an input.
P port input/output (push-pull design structure). At power on, P7 is configured as
an input.
Interrupt output. Connect to VCCI through a pullup resistor.
Serial clock bus. Connect to VCCI through a pullup resistor.
Serial data bus. Connect to VCCI through a pullup resistor.
Supply voltage of TCA6408 for P port.
Submit Documentation Feedback
3