English
Language : 

TCA6408_09 Datasheet, PDF (12/31 Pages) Texas Instruments – LOW-VOLTAGE 8-BIT I2C AND SMBus I/O EXPANDER WITH INTERRUPT OUTPUT, RESET, AND CONFIGURATION REGISTERS
TCA6408
LOW-VOLTAGE 8-BIT I2C AND SMBus I/O EXPANDER
WITH INTERRUPT OUTPUT, RESET, AND CONFIGURATION REGISTERS
SCPS151C – FEBRUARY 2007 – REVISED JUNE 2007
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
www.ti.com
VCCI
VCCP
VI
VO
IIK
IOK
IIOK
IOL
IOH
ICC
θJA
Tstg
Supply voltage range
Supply voltage range
Input voltage range(2)
Output voltage range(2)
Input clamp current
Output clamp current
Input/output clamp current
Continuous output low current
Continuous output low current
Continuous output high current
Continuous current through GND
Continuous current through VCCP
Continuous current through VCCI
ADDR, RESET, SCL
INT
P Port
SDA
P Port
SDA, INT
P Port
Package thermal impedance(3)
Storage temperature range
VI < 0
VO < 0
VO < 0 or VO > VCCP
VO < 0 or VO > VCCI
VO = 0 to VCCP
VO = 0 to VCCI
VO = 0 to VCCP
PW package
RGT package
ZXY package
MIN
MAX UNIT
–0.5
6.5 V
–0.5
6.5 V
–0.5
6.5 V
–0.5
6.5 V
±20 mA
±20 mA
±20 mA
±20 mA
50 mA
25 mA
50 mA
200 mA
160 mA
10 mA
108
53 °C/W
193
–65
150 °C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
VCCI
VCCP
VIH
VIL
IOH
IOL
TA
Supply voltage
Supply voltage
High-level input voltage
Low-level input voltage
High-level output current
Low-level output current
Operating free-air temperature
SCL, SDA
ADDR, P7–P0, RESET
SCL, SDA
ADDR, P7–P0, RESET
P7–P0
P7–P0
MIN
1.65
1.65
0.7 × VCCI
0.7 × VCCP
–0.5
–0.5
–40
MAX
5.5
5.5
5.5
5.5
0.3 × VCCI
0.3 × VCCP
10
25
85
UNIT
V
V
V
mA
mA
°C
12
Submit Documentation Feedback