CC2570 Datasheet, PDF (24/32 Pages) Texas Instruments – 1- and 8-Channel ANT™ RF Network Processors

CC2570
CC2571
SWRS095A – FEBRUARY 2011 – REVISED MARCH 2011
www.ti.com
Table 7. FS/ANT-FS Specific Serial Messages (continued)
Class
Message ⁽¹⁾
ID
Description
Reply Requested Event
CRYPTO_ADD_USER_KEY_
INDEX
0xE245
Adds specified user key to be stored
in internal memory.
Yes
No
No
FS crypto CRYPTO_SET_USER_KEY_
commands INDEX
0xE246
Specify stored user key to be used by
FS encryption/decryption process.
Yes
No
No
CRYPTO_SET_USER_KEY_VAL
0xE247
Specify non-user key to be used by
FS encryption/decryption process
Yes
No
No
ANTFS_OPEN
0xE231 Opens ANT-FS beacon.
Yes
No
No
ANTFS_CLOSE
0xE232 Closes ANT-FS beacon.
Yes
No
No
ANTFS_CONFIG_BEACON
0xE233 Configure ANT-FS beacon.
Yes
No
No
ANTFS_SET_AUTH_STRING
0xE234 Set authentication string.
Yes
No
No
ANTFS_SET_BEACON_STATE 0xE235 Set beacon state.
Yes
No
No
ANT-FS
commands
ANTFS_PAIR_RESPONSE
ANTFS_SET_LINK_FREQ
ANTFS_SET_BEACON_
TIMEOUT
0xE236 Respond to pairing request.
0xE237 Set Link state RF frequency.
0xE238 Set beacon timeout.
Yes
No
No
Yes
No
No
Yes
No
No
ANTFS_SET_PAIRING_
TIMEOUT
0xE239 Set pairing timeout.
Yes
No
No
ANTFS_REMOTE_FILE_
CREATE_EN
0xE23A Enable creation of remote file.
Yes
No
No
SYSTEM_TIME
0xE23D Set system time.
Yes
No
No
ANT-FS
requests
ANTFS_GET_CMD_PIPE
ANTFS_SET_CMD_PIPE
SYSTEM_TIME
0xE23B Get commands from command pipe.
–
0xE23C Write command to command pipe.
–
0xE23D Request system time.
–
Yes
No
Yes
No
Yes
No
ANT-FS
events
RESPONSE_ID
Extended event message with
0xE000 payload. See table xx for list of
ANT-FS events.
–
No
Yes
ANT-FS generates events to mark important occurrences during the ANT-FS transaction. These events are
delivered to the host using the 0xE000 message. It is not necessary to request this message; rather, events are
generated and sent by ANT to the host as required. The table below summarizes the ANT-FS events.
Event ⁽¹⁾
PAIR_REQUEST
DOWNLOAD_START
UPLOAD_START
DOWNLOAD_COMPLETE
UPLOAD_COMPLETE
ERASE_COMPLETE
LINK_STATE
AUTH_STATE
TRANSPORT_STATE
CMD_RECEIVED
CMD_PROCESSED
Table 8. ANT-FS Event Messages
Code
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0A
0x0B
Description
A pairing request has been received from the ANT-FS Host.
The download of a file was started by an ANT-FS Host.
The upload of a file by an ANT-FS Host has started.
The download of a file by an ANT-FS Host has completed.
The upload of a file from an ANT-FS Host has completed.
The erase of a file has been completed.
The ANT-FS client has entered the LINK state.
The ANT-FS client has entered the AUTH state.
The ANT-FS client has entered the TRANSPORT state.
A command was received on the command pipe.
A command was received and processed on the command pipe.
(1) Precede with MESG_FS_ANTFS_EVENT_
24
Submit Documentation Feedback
Product Folder Link(s): CC2570 CC2571
Copyright © 2011, Texas Instruments Incorporated