LMH6624MF Datasheet, PDF (2/31 Pages) Texas Instruments – LMH6624/LMH6626 Single/Dual Ultra Low Noise Wideband Operational Amplifier

LMH6624
SNOSA42F – NOVEMBER 2002 – REVISED MARCH 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾
ESD Tolerance
Human Body Model
Machine Model
V_IN Differential
Supply Voltage (V⁺ - V^−)
Voltage at Input pins
Soldering Information
Infrared or Convection (20 sec.)
Wave Soldering (10 sec.)
Storage Temperature Range
Junction Temperature ⁽⁴⁾, ⁽⁵⁾
2000V ⁽²⁾
200V ⁽³⁾
±1.2V
13.2V
V⁺ +0.5V, V^− −0.5V
235°C
260°C
−65°C to +150°C
+150°C
(1) Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) Human body model, 1.5kΩ in series with 100pF.
(3) Machine Model, 0Ω in series with 200pF.
(4) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C.
(5) The maximum power dissipation is a function of T_J(MAX), θ_JA, and T_A. The maximum allowable power dissipation at any ambient
temperature is P_D = (T_J(MAX) - T_A)/ θ_JA . All numbers apply for packages soldered directly onto a PC board.
Operating Ratings ⁽¹⁾
Operating Temperature Range
(2)_, (3)
Package Thermal Resistance (θ_JA)⁽³⁾
SOIC-8
SOT23–5
VSSOP-8
−40°C to +125°C
166°C/W
265°C/W
235°C/W
(1) Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C.
(3) The maximum power dissipation is a function of T_J(MAX), θ_JA, and T_A. The maximum allowable power dissipation at any ambient
temperature is P_D = (T_J(MAX) - T_A)/ θ_JA . All numbers apply for packages soldered directly onto a PC board.
2
Submit Documentation Feedback
Product Folder Links: LMH6624
Copyright © 2002–2013, Texas Instruments Incorporated