SLK2511 Datasheet, PDF (15/21 Pages) Texas Instruments – OC-48/24/12/3 SONET/SDH MULTIRATE TRANSCEIVER

PLL performance specifications
PARAMETER
PLL startup lock time
Acquisition lock time
SLK2511
OC-48/24/12/3 SONET/SDH MULTIRATE TRANSCEIVER
SLLS522A – JUNE 2002 – REVISED OCTOBER 2002
TEST CONDITIONS
VDD, VDDC = 2.3 V, after REFCLK is stable
Valid SONET signal or PRBS OC-48
MIN TYP MAX UNIT
1 ms
2031
Bit
Times
serial transmitter/receiver characteristics
PARAMETER
V(ODD) = |STXDOP–STXDON|, transmit
differential output voltage under
de-emphasis
V(CMT)
V(CMR)
Il
Rl
CI
td(TX_Latency)
td(RX_Latency)
Transmit common mode voltage range
Receiver Input voltage requirement,
VID=|SRXDIP–SRXDIN|
Receiver common mode voltage range
Receiver input leakage
Receiver differential impedance
Receiver input capacitance
TEST CONDITIONS
PRE1 = 0,
PRE2 = 0, Rt = 50,
See Table 4 and Figure 1
PRE1 = 1,
PRE2 = 0
PRE1 = 0,
PRE2 = 1
PRE1 = 1,
PRE2 = 1
Rt = 50 Ω
MIN NOM MAX UNIT
650 850 1000 mV
550 750 900
540 700 860 mV
500 650 800
1100 1250 1400 mV
150
mV
1100
–550
80
1250
100
2250
550
120
1
50
50
mV
µA
Ω
pF
Bit
Times
serial differential switching characteristics over recommended operating conditions (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
tt
Differential signal rise time (20% to 80%) RL = 50 Ω,
80 100 140 ps
tj
Output jitter
Jitter-free data, 12 kHz to 20 MHz, RLOOP = 1
0.05 0.1 UI(pp)
Jitter tolerance
RLOOP = 1
See Figure 3
Jitter transfer
RLOOP = 1
See Figure 2
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
15