BQ24616 Datasheet, PDF (14/34 Pages) Texas Instruments – JEITA Guideline Compatible Stand-Alone Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger with System Power Selector and Low Iq

bq24616
SLUSA49A – APRIL 2010 – REVISED MAY 2010
OPERATIONAL FLOWCHART
POR
Turn on
BATDRV FET
VCC > SRN
SLEEP MODE
No
Indicate SLEEP
Yes
Enable VREF LDO &
Chip Bias
30ms delay
Turn off BATFET
Turn on ACFET
www.ti.com
Indicate battery
absent
No
Battery
present?
Initiate battery
detect algorithm
Yes
See Enabling and Disabling
Charge Section
Conditions met
for charge?
No
Yes
VFB < VLOWV
Yes
Indicate NOT
CHARGING,
Suspend timers
No
Conditions met
for charge?
Start 30 minute
precharge timer
Yes
Regulate
precharge current
Indicate Charge-
In-Progress
No
VFB < VLOWV Yes
Precharge
timer expired?
No
Start Fastcharge
timer
Indicate NOT
CHARGING,
Suspend timers
Regulate
fastcharge current
No
Conditions met
Yes
for charge?
Indicate Charge-
In-Progress
Turn off charge,
Enable IDISCHG for 1
second
Yes
Indicate Charge In
Progress
No
VFB > VRECH
&
ICHG < ITERM
No
Fastcharge
Timer Expired?
No
Yes
Yes
FAULT
Enable IFAULT
Indicate FAULT
VFB < VRECH
Charge Complete
No
Indicate DONE
No VFB > VRECH
Yes
Battery Removed
Yes
Indicate BATTERY
ABSENT
Figure 14. Operational Flowchart
14
Submit Documentation Feedback
Product Folder Link(s): bq24616
Copyright © 2010, Texas Instruments Incorporated