AM1810 Datasheet, PDF (116/259 Pages) Texas Instruments – AM1810 ARM Microprocessor For PROFIBUS

AM1810
SPRS709B – NOVEMBER 2010 – REVISED DECEMBER 2011
www.ti.com
5.11.3.10 VREF Routing
VREF is used as a reference by the input buffers of the DDR2/mDDR memories as well as the device.
VREF is intended to be half the DDR2/mDDR power supply voltage and should be created using a
resistive divider as shown in Figure 5-16. Other methods of creating VREF are not recommended.
Figure 5-20 shows the layout guidelines for VREF.
VREF Bypass Capacitor
DDR2/mDDR Device
A1
VREF Nominal Minimum
Trace Width is 20 Mils
DDR2/mDDR
A1
Neck down to minimum in BGA escape
regions is acceptable. Narrowing to
accomodate via congestion for short
distances is also acceptable. Best
performance is obtained if the width
of VREF is maximized.
Figure 5-20. VREF Routing and Topology
116 Peripheral Information and Electrical Specifications
Copyright © 2010–2011, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): AM1810