108-1228 Datasheet, PDF (6/7 Pages) TE Connectivity Ltd – Signal application only, 1 ampere maximum at 50% energized, See Figure 2.

4.4. Quality Conformance Inspection
108-1228
The applicable quality inspection plan will specify the sam pling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
4.5. Certification
Product has been recognized under the Com ponent Recognition Program of Underwriters' Laboratories
Inc., Electrical File number E-28476, and certified by Canadian Standards, File Number LR-86179-1.
Note: Voltage drop due to “X” of wire is to be removed from all readings.
(Backshells not Illustrated)
Figure 5
Termination Resistance Measurement Points
Rev F
6 of 7