108-1228 Datasheet, PDF (3/7 Pages) TE Connectivity Ltd – Signal application only, 1 ampere maximum at 50% energized, See Figure 2.

Test Description
Mating force.
Unmating force.
Housing lock strength.
Thermal shock.
Hum idity-tem perature cycling.
Temperature life.
Mixed flowing gas.
R equirem ent
Connector
Position
20 - 40
42 - 60
62 - 80
82 - 100
102 - 120
Pounds
M axim um
15
20
30
40
50
Connector
Position
20 - 40
42 - 60
62 - 80
82 - 100
102 - 120
Pounds
M inim um
1.5
2.0
3.0
5.0
7.0
25 pounds minimum.
ENVIRONMENTAL
See Note.
See Note.
See Note.
See Note.
108-1228
Procedure
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples without locking latches at
maximum rate of 1 inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to
unmate samples without locking
latches at maximum rate of 1 inch
per minute.
TE Spec 109-50.
Determine strength of housing
locking mechanism.
TE Spec 109-22.
Subject m ated sam ples to 25
cycles between -55 and 105°C.
TE Spec 109-23-4, Condition B.
Subject m ated sam ples to 10
cycles between 25 and 65°C at
95% RH.
TE Spec 109-43.
Subject m ated sam ples to
temperature life at 105°C for 500
hours.
TE Spec 109-85-3.
Subject m ated sam ples to
environm ental class III for 20 days.
NOTE
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 3.
Figure 1 (end)
Rev F
3 of 7