C5750X7R1H106M Datasheet, PDF (63/72 Pages) TDK Electronics – C Series General Application

General
Specifications
C Series – General Application
No. Item
Performance
Test or Inspection Method
7
Temperature
T.C. Temperature Coefficient
Temperature coefficient shall be calculated based on
Characteristics
C0G 0 ± 30 (ppm/ºC)
values at 25ºC and 85ºC temperature.
of Capacitance
(Class 1)
Capacitance drift
Within ± 0.2% or ±0.05pF, whichever
Measuring temperature below 20ºC shall be -10ºC and
-25ºC.
larger.
8
Temperature
Capacitance Change (%)
Characteristics
of Capacitance
No Voltage Applied
X5R: ± 15%
(Class 2)
X7R: ± 15%
X6S: ± 22%
X7S: ± 22%
X7T: +22/-33%
Y5V: + 22/-82%
Capacitance shall be measured by the steps shown in
the following table after thermal equilibrium is obtained
for each step.
∆C be calculated ref. STEP 3 reading
Step Temperature (ºC)
1
Reference temp. ± 2
2
Min. operating temp. ± 2
3
Reference temp. ± 2
4
Max. operating temp. ± 2
Measuring voltage: 0.1, 0.2, 0.5, 1.0V_rms.
9
Robustness of No sign of termination coming off,
Reflow solder the capacitor on P.C. board (shown in
Terminations
breakage of ceramic, or other abnormal Appendix 1a or Appendix 1b) and apply a pushing
signs.
force of 2N (C0603, C1005) or 5N (C1608, C2012,
C3216, C3225, C4532, C5750) for 10±1s.
Pushing force
10
Bending
No mechanical damage.
Capacitor
P.C. board
Reflow solder the capacitor on P.C. board (shown in
Appendix 2a or Appendix 2b) and bend it for 1mm.
20
50
F
R230
45
45
1
Unit: mm
TDK MLCC US Catalog
Page 65
Version B11