CGA5L2X8R1E105KTXXXX Datasheet, PDF (30/36 Pages) TDK Electronics – Automotive Grade Capacitors

General
Specifications
CGA Series – Automotive Grade Capacitors
No. Item
Performance
Test or Inspection Method
12
Resistance to solder heat
Completely soak both terminations in solder at
External
260±5ºC for 5±1s.
No cracks are allowed and terminations
appearance
shall be covered at least 60% with new
solder
Preheating condition
Temp. : 150±10ºC
Capacitance
Characteristics
Class 1 C0G
Change from the
value before test
Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Time : 1 to 2min.
Flux : Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
Solder : H63A (JIS Z 3282)
Class 2 X7R
X8R
± 7.5 %
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Q (Class 1)
Rated Capacitance Q
30pF and over
1,000 min.
Under 30pF
400+20×C min.
C : Rated capacitance (pF)
D.F. (Class 2)
Meet the initial spec.
Insulation
Resistance
Meet the initial spec.
Voltage
Proof
No insulation breakdown or other
damage.
13
Vibration
External
appearance
Capacitance
No mechanical damage.
Characteristics
Class 1 C0G
Class 2 X7R
X8R
Change from the
value before test
Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
± 7.5 %
Reflow solder the capacitor on a P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Vibrate the capacitor with following conditions:
Applied force: 5G max.
Frequency: 10-2000Hz
Duration: 20 min.
Cycle : 12 cycles
Q (Class 1)
D.F. (Class 2)
Rated Capacitance
30pF and over
Under 30pF
Q
1,000 min.
400+20×C min.
C : Rated capacitance (pF)
Meet the initial spec.
TDK MLCC US Catalog
Page 318
Version B11